*mydirectindustry

Catalogs
IMADA
Vise Grips GT-30/2000N

Vise Grips GT-30/2000N

Product catalog summary

Overview: IMADA Co., Ltd. provides a range of vise grips designed for various testing applications. These grips are used to secure samples to a test stand and are available in different models to accommodate different sample materials and testing requirements.

Product Specifications:

Standard Type (Lever): Model GT-30, Capacity 1000N, Grip Width 38mm, Opening Width 38mm, Weight approx. 1100g.
Hard Grip Type (Lever): Model GT-30-E, Capacity 1000N, Grip Width 38mm, Opening Width 35mm, Weight approx. 1100g. Suitable for slippery samples.
Polyurethane Grip Type (Lever): Model GT-30-U, Capacity 250N, Grip Width 38mm, Opening Width 35mm, Weight approx. 1100g. Suitable for delicate films.
High Capacity Type (Lever): Model GT-2000N, Capacity 2000N, Grip Width 62mm, Opening Width 64mm, Weight approx. 4400g. Not suitable for soft samples.

Options:

Vise Jaws for GT-30-E and GT-30-U are available, sold individually.

Measurement Examples: Suitable for stuffing and pulling out tests of plastic materials and 180-degree peeling tests of films.

Attachable Test Stands: Compatible with various motorized and manual test stands, including MX-500N/1000N, MX3-500N/2500N/5000N, and others.

Related Products: Includes T-Slot Table, Roller Grip, Flat Chuck, Film Grip, Wedge Grip, and Jacob’s Chuck, each designed for specific sample types and testing needs.

Dimensions: Detailed dimensions are provided for models GT-30 and GT-2000N, with specific notes on alignment and compatibility.

Cautions:

Specifications may change without notice.
A force gauge is required for use.
Designed for force testing only.
Not all samples may be suitable for these grips.

Contact Information: IMADA Co., Ltd., Toyohashi, Japan. Tel: +81-(0)532-33-3288, Email: [email protected], Website: https://www.forcegauge.net/en/

Catalog excerpts

FORCE MEASUREMENT FORCE MEASUREMENT Vise Grips Vise grips to fix samples to a test stand. Vise grips for multi purposes. Variety of vise is available depending on sample materials and measurement

Open the catalog to page 1

Measurement Example Stuffing and pulling out test of plastic materials 180 degrees peeling test of film Related Products

Open the catalog to page 2

IMADA Co., Ltd. Vise Grips * The dimension of this part is 11mm in the older version. Depending on the sample size, the center may not align properly, resulting in failure to perform measurement. Please check this depth of your GT-30 against the sample size and the test stand to ensure proper center alignment.

Open the catalog to page 3

IMADA Co., Ltd. Vise Grips [Cautions] - Specifications are subject to change without prior notice. - A force gauge (sold separately) is required to use this product. - This product is designed for force testing only. Do not use it for any other purposes. - Some samples may not be suitable to grip with this product. - Do not copy and use this content without authorization. IMADA CO., LTD 99 Jinnoshinden-cho aza Kanowari Toyohashi Japan 441-8077 Tel: +81-(0)532-33-3288 Fax: +81-(0)532-33-3866 E-mail: [email protected] Website: https://www.forcegauge.net/en/ Visit our website for more information...

Open the catalog to page 4

Vise Grips GT-30/2000N

Vise Grips GT-30/2000N

Catalog excerpts

All IMADA catalogs and technical brochures

Archived catalogs