IMADA CO.,LTD. Set Up Software for Test Stands CS Test Preset Builder MX3/EMX2 Series, the successor to MX2/EMX Series, builds on the proven value of highly repeatable benchtop force testing with enhanced usability and improved test condition management. This guide highlights the key improvements introduced in MX3/EMX2 Series compared with MX2/EMX Series. It also includes detailed specifications comparisons and FAQs to support product selection. *1 Available options differ between MX2 and MX3 series. For details, please refer to the Specifications section on page 3. *2 MX3 Series does not include a 1000N model. Depending on your testing requirements, please consider the MX3-500N, MX3-2500N, or EMX2-1000N.

IMADA CO.,LTD. Set Up Software for Test Stands CS Test Preset Builder MX3/EMX2 Series has evolved into a Next Series-compatible test stand. With support for online firmware updates and future feature enhancements, users can benefit from the latest functions and services even after installation. Firmware updates can be performed online without returning the product to IMADA, minimizing downtime and helping maintain an up-to-date testing environment. • Support for online firmware updates (no PCB replacement required) • Support for future online feature enhancements (additional features will be...

IMADA CO.,LTD. Set Up Software for Test Stands CS Test Preset Builder Test Condition Setup Software Included • A Wide Range of Templates for Easy Test Condition Setup • Save and Recall Test Conditions for Efficient Switching • Store Test Condition Files on a PC for Backup and Reuse MX3/EMX2 Series comes with CS Test Preset Builder, software for creating and editing test conditions from a PC. In addition to flexible test condition settings, the software provides a wide range of templates to simplify setup. By utilizing these templates, users can not only create test conditions more easily but...

IMADA CO.,LTD. Set Up Software for Test Stands CS Test Preset Builder *1 This value is the distance between the test stand table and the tip of force gauge measuring shaft when the head is in the uppermost position. (MX3-500N/MX2-500N/1000N: When up to 1000N model of ZTS/ZTA series, MX3-2500N/5000N: When over 2500N model of ZTS/ZTA series is mounted.) *2 The available speed units differ depending on whether the model is for the Japanese or international market. *3 Connection to a compatible force gauge with a dedicated cable is required. Refer to the specifications of each test stand model. *4...

IMADA CO.,LTD. Set Up Software for Test Stands CS Test Preset Builder *1 This value is the distance between the test stand table and the tip of force gauge measuring shaft when the head is in the uppermost position. (When up to 1000N model of ZTS/ZTA series is mounted.) The maximum sample height of EMX2-1000N varies depending on the mounting position and direction of the force gauge mounting plate. Refer to the specifications of each test stand model for details. *2 The available speed units differ depending on whether the model is for the Japanese or international market. *3 Connection to a...

IMADA CO.,LTD. Set Up Software for Test Stands CS Test Preset Builder [Mountable Force Gauges] - Load cells not listed cannot be mounted on any of our test stands. *1 Mounting block (sold separately) is required to mount DPUH series (1000N to 5000N) Q: Can attachments used with MX2/EMX Series be mounted on MX3/EMX2 Series? A: Yes. MX3 Series is compatible with MX2 Series, and EMX2 Series is compatible with EMX Series. Existing attachments can continue to be used between corresponding models with the same maximum force capacity. Please note that the following accessories are not compatible: •...

IMADA CO.,LTD. Set Up Software for Test Stands CS Test Preset Builder Q: Can test conditions configured on MX2/EMX Series be reproduced on MX3/EMX2 Series? A: Yes. Test conditions configured on MX2 and EMX Series can be reproduced on the corresponding MX3 and EMX2 models, respectively. Please note, however, that the speed range options available for MX2-2500N are not available for MX3-2500N. Q: Which model should I choose as an equivalent to MX2-1000N? A: Depending on your testing requirements, please consider MX3-500N, MX3-2500N, or EMX2-1000N. The most suitable model depends on factors such...