Catalogs >
IMADA >
Torque-Angle Measurement Unit TAA series

Torque-Angle Measurement Unit TAA series
10Pages

Catalog excerpts

Torque-Angle Measurement Unit TAA series - 1

IMADA CO., LTD. Torque-Angle Measurement System TAA series - Measurement unit to analyze Torque (Rotating/Twisting force) -Angle relationships - Simple and accurate Torque-Angle measurement with high repeatability - Drawing and analyzing graphs with PC, simple real time operations - Desktop and handheld types available to meet your measurement needs Handheld type TAA-HTG series TAA series is a measurement unit which can be used to measure and analyze Torque-Angle relationships. The high-speed sampling rate of 2000 Hz provides highly repeatable measurement results and draws smooth graph of torque-angle curves in real time. It is ideal for product quality control, operability, usability, physical characteristics, and functional evaluation.

Open the catalog to page 1

Torque-Angle Measurement Unit TAA series - 2

IMADA CO., LTD. Torque-Angle Measurement System TAA series [ TAA-MTS-TB Series Unit configuration] TAA-MTS-TB series Product Configuration 1. Screw Cap Torque Tester: DTXA series Measurement for rotating and twisting forces. Easily detachable for repair or calibration requirements. 2. Motorized Torque Stand: MTS-10N-RA The upper attachment rotates at the set speed. Possible settings of the operations by the torque value and continuous rotating period. 3. Option Cable: CB-728 Connecting DTXA and MTS-10N-RA for control. 4. Software: Force Recorder Professional Real time Torque and Angle...

Open the catalog to page 2

Torque-Angle Measurement Unit TAA series - 3

IMADA CO., LTD. Torque-Angle Measurement System TAA series * The sample diameter depends on the selected Attachment. Refer to Specification sheet in our website “Torque Gauge/ Motorized Torque Stand Table Attachments”. *1 ( ): Required capacity to be selected. *2 Note that the sensor failure occurs with overcapacity force applied. *3 Custom-made devices are required for measuring sample heights over 340mm. *4 Depending on the sample size, extension shafts may be required. Refer to P4 for details. *5 Long stroke options can be also added for models with Z specifications. [TAA-MTS-TB series...

Open the catalog to page 3

Torque-Angle Measurement Unit TAA series - 4

IMADA CO., LTD. Torque-Angle Measurement System TAA series[Software operating environment] Operating environment [Downloadable Graphing Software Option] Downloadable Torque-Angle (Force-Displacement) Graphing Software *1 When -NEXT option is applied, the dedicated download card providing the redemption code is included. To use the software, downloading the software from IMADA Connected is required. * To download Force Recorder Next Professional, user & product registration on IMADA Connected is required. * An Internet connection is required in process of user & product registration and...

Open the catalog to page 4

Torque-Angle Measurement Unit TAA series - 5

IMADA CO., LTD. Torque-Angle Measurement System TAA series [Related Products TAA-MTS-TB series] For upper part Small chuck MT-ST Designed for small samples Sample diameter: φ7-50mm Capacity: 5N-m Selectable pin from standard, notch and long Ideal for gripping columnar samples Large: φ1.2-13mm Standard: φ0.5-6.5mm Small: φ0.5-4mm *1 The Fixing Pin for Standard Chuck MT-TB. Suitable for holding nozzle caps, etc. since its long shaft allows the pin knob to avoid obstacles and to clump the sample properly. For lower part Small table DT-ST Designed for small samples Sample diameter: φ7-50mm...

Open the catalog to page 5

Torque-Angle Measurement Unit TAA series - 6

IMADA CO., LTD. Torque-Angle Measurement System TAA series TAA-HTG Series Twisting torque tests of doorknobs Product Configuration 1. Handheld Digital Torque Gauges : HTGA series Measuring rotating torque and twisting torque 2. Angle Meter Kit: AMK-360 Measure and output the angle 3. Software: Force Recorder Professional Drawing torque-angle graph at real time Related Products (separately sold) 4. Attachment Required to fix the samples. 5. Stay (Custom-made) Required to measure with angle meter kit. Fixing the stay allows to start from 0 point and measure accurate angle measurement. Unit...

Open the catalog to page 6

Torque-Angle Measurement Unit TAA series - 7

IMADA CO., LTD. Torque-Angle Measurement System TAA series [TAA-HTG series specification] *1 kgf-m/kgf-cm, lbf-in/ozf-in are only available for international model. *2 Do not apply force more than its capacity or from the incorrect direction to the sensor. *3 USB flash drive is not included in TAA-HTG series. *4 Stay (Custom-made), optional attachment, and PC are not included in TAA-HTG series.. [Software operating environment] Operating environment [Downloadable Graphing Software Option] *1 When -NEXT option is applied, the dedicated download card providing the redemption code is included....

Open the catalog to page 7

Torque-Angle Measurement Unit TAA series - 8

IMADA CO., LTD. Torque-Angle Measurement System TAA series * Refer to the specification sheet of each Attachments for details. *1 This product can be sold to Japan and EU markets only. Please contact us if you would like to purchase the product in other regions. Data output from HTGA series to RS232C printer is supported only for products with firmware Ver. 3.10 or later; For Next Series products, "RS232C Print Function" must be installed via network. 8 / 10 2023/12/27

Open the catalog to page 8

Torque-Angle Measurement Unit TAA series - 9

IMADA CO., LTD. Torque-Angle Measurement System TAA series Custom-made example of stay 2 legs type - Suitable for use in limited space - For stable torque measurement - When space is enough for fixing the 4 legs Handle type - When there is no space for fixing the leg - Lower accuracy of meaurement due to handheld testing * The stay is required to measure with angle meter unit. Fixing the stay allows to start from 0 point and measure accurate angle measurement. * Please contact authorized local distributor or us for custom-made order.

Open the catalog to page 9

Torque-Angle Measurement Unit TAA series - 10

IMADA CO., LTD. Torque-Angle Measurement System TAA series [Cautions] - Information in this document is subject to change without prior notice. - This document is product descriptions and handling precautions, and do not guarantee various characteristics or safety. - This product is designed for force measurement purpose only. - Do not copy and use this content without authorization. - Do not apply torque more than its capacity or from incorrect direction to the sensor. - Do not use this product in the environments including fierce temperature changes, high temperature, high humidity, near...

Open the catalog to page 10