Catalogs >
IMADA >
TFX Series

TFX Series
4Pages

Catalog excerpts

IMADA CO., LTD. Flange Type Torque Load Cell TFX series Flange Type Torque Load Cell TFX series - Reaction torque sensor for torque (turning/twisting force) measurement - Ideal for integration using through holes on both sides of the sensor - Small body, suitable for measurements where access is limited - 4 selectable amplifiers (indicators) to fit for purpose - Graphing software (separately sold) available for analysis of results TFX series * IP (Ingress Protection) is a standard which is based on IEC Standard for solid foreign materials, electric devices for water and cabinet. * eZ-Connect series load cells are interchangeable and can be connected to one amplifier without adjustment, therefore suitable for measurement of different types of force (e.g. tension and torque) or ranges (e.g. small force and high capacity). Features Small Size Through holes in the upper and lower flanges for easy integration Testing Examples The torque value is measured by installing it to a spot where a torsional force is applied in production or inspection equipment, such as integrating into a torque tester or a torque control system of a production line. Custom-made jigs are available to meet a wide variety of torque measurement needs.

Open the catalog to page 1

IMADA CO., LTD. Flange Type Torque Load Cell TFX series Specifications TFX series (*1) eTFX series Refer to table below Safe Overload Rating Recommended Temperature (Allowable Temperature) * An amplifier (indicator) is required to read values. Refer to “Amplifiers (Indicators)” below for details. *1 This model is available as a set combined with indicator; HTGS-TFX/HTGA-TFX series. Refer to the table of models below. *2 IP is only approved for the sensor part. The amplifier (indicator), the connector parts, and cable are not secured. Amplifiers (Indicators) Type Sensor Combined with...

Open the catalog to page 2

IMADA CO., LTD. Flange Type Torque Load Cell TFX series [Models of eZ-Connect Series (Sensor Interchangeable Model) Model eTFX series * An indicator (amplifier) for eZ-Connect is required. Refer to the specification sheet of indicator (amplifier) for details. *1 It is the accuracy of the sensor and indicator (amplifier) of eZ-connect series combined. [Custom-made Cables] Extended Cable Length Enhanced Cable Flexibility Extends the length of a cable for gauge to PC connection or load cell to amplifier connection Changes the cable to a high-flex cable to reduce risks of disconnection *...

Open the catalog to page 3

IMADA CO., LTD. Flange Type Torque Load Cell TFX series same for the other side [Cautions] - Information in this document is subject to change without prior notice. - This document introduces product descriptions and handling precautions, and it does not guarantee the features or safety mentioned therein. - This product is designed for force measurement purpose only. - Do not copy and use this content without authorization. - Do not apply force more than its capacity or from incorrect direction to the measuring shaft. - Do not use this product in the environments including fierce...

Open the catalog to page 4