Test Stand Comparison Table - Test stand helps to stabilize testing conditions, ensuring uniformity - Manual test stands enable uniformity in the direction of force application. - Motorized Test Stands enable uniformity in the direction of force and the test speed. * Even with the same sample, the values may vary depending on the test stand used, due to differences in the body rigidity, etc. For comparison of measurement values, the use of the same test stand model is recommended. Please refer to the individual models' specifications for comparison references.

Test Stand Comparison Table Motorized Test Stand (Vertical type: Simple/Standard)] Please refer to page 4 for the additional notes on *1 to *5.

Test Stand Comparison Table **1 Contact detection and Break detection cannot be used together. **2 This information for models with firmware Ver. 2.0 or later; some functions unapplicable for Models with firmware less than Ver. 2.0. - Please refer to page 4 for the additional notes on *1 to *5.

Test Stand Comparison Table *1 Counter function enables automatic repeat testing for the set number of times. *2 Timer function sets up pausing time at specified point. *3 It does not guarantee complete prevention of failure from overloads. It is activated only when a compatible force gauge is connected by a dedicated cable. Refer to each specification for further details. *4 Connection of the stand with Linear Scale (-FA option) and a compatible force gauge by a dedicated cable is required. Refer to each specification for further details. *5 Refer to the individual specifications for details....

Manual Test Stand (Vertical Type)] [Manual Test Stand (Horizontal Type)] Manual Test Stand (Compact type) - Effective testing for the set distances - Testing of the fractional move application - Portable / Compact - Enable Testing at various angles - Enable (suitable for) force-displacement (*1) analysis *1 Force-displacement unit (MSL-50N) is necessary for displacement output. * Some options are available to add functions. Refer to each specification sheet for further details. Custom-made solutions offered based on your requirements. Contact us for details.

IMADA CO., LTD. Test Stand Comparison Table [Examples of Customized Solutions] Controller-separated Model Testing Large Samples External signal input To incorporate a force measuring system into your equipment or to operate the stand remotely to avoid accidents. For testing a sample larger than the standard test stand table or testing multiple points on a large sample to push in/pull. Possible to incorporate with a switch (such as a foot pedal type) for (start/stop) operability efficiency. Also, enable connection with your own devices. *Please contact us for details of our customization services....