*mydirectindustry

Catalogs
IMADA
TATJ-5000N Tensile Adhesion Test Jig

TATJ-5000N Tensile Adhesion Test Jig

Product catalog summary

Overview: The Tensile Adhesion Test Jig TATJ-5000N by IMADA.CO.,LTD is designed for measuring the adhesive bonding strength, partially complying with JIS K 6849 (1994) standards. It features a centering mechanism for uniform load application, enhancing measurement accuracy.

Specifications: The model TATJ-5000N has a capacity of 5000N, weighs approximately 250g per piece, and uses an M10 mounting screw. The set includes two jigs (upper and lower). The weight of the attachment is added to the force gauge load, which should be checked before selecting the force gauge capacity.

Measuring Procedures: The procedure involves setting the jigs, installing the adhered test piece, and applying tensile force to pull apart the sample.

Sample Specimens: Test pieces for JIS K 6849 (1994) are available for purchase. They include round and square bars with specific dimensions and hole sizes. A minimum of five sets is required for compliance testing.

Product Configurations: Two configurations are available: Configuration 1 for tests up to 5000N and Configuration 2 for tests up to 1000N. Each configuration includes a digital force gauge, motorized test stand, and optional attachments.

Data Management: The Peel/Pressure Data Import Function allows for data import in various units (N/cm, Pa, etc.) and includes a pressure conversion function for productivity improvement. This function requires user registration and product registration.

Related Products: The document mentions related software and adapters, such as the Force Logger Next and CA series conversion adapters, which enhance measurement capabilities and compliance with standards.

Cautions: The document notes that information is subject to change, and the product is designed solely for force measurement. A separate force gauge is required, and not all samples may be suitable for measurement with this product.

Catalog excerpts

IMADA.CO.,LTD Tensile Adhesion Test Jig TATJ-5000N Tensile Adhesion Test Jig TATJ-5000N A Jig designed for the Adhesive Bonding Strength Measurement Possible to conduct measurements partially complying with JIS K 6849 (1994) The centering mechanism enables uniform and perpendicular load application for the measurement accuracy Related Standards JIS K 6849 (1994) [Testing methods for tensile strength of adhesive bonds] (corresponding part only) Measuring Procedures Set jigs (Upper and Lower sides) Install adhered test piece Apply Tensile Force to pull apart

Open the catalog to page 1

Tensile Adhesion Test Jig TATJ-5000N ■ For every measurement, 1 set (2pcs) of sample specimen is required. ** For tests complying with JIS K 6849 (1994), min. 5sets of samples required for testing (2pcs bonded at the middle as 1 Tensile Adhesive Tests up to 5000N Partly Compliant with JIS K 6849 (1994): Testing methods for tensile strength of adhesive bonds Caters up to 5000N Digital Force Gauge: ZTS-5000N Motorized Test Stand: MX2-5000N Optional Attachment: TATJ-5000N Optional Dedicated Cable: CB-528 Tensile Adhesive Tests up to 1000N Partly complies with JIS K 6849 (1994): Testing methods for...

Open the catalog to page 2

IMADA.CO.,LTDTensile Adhesion Test Jig TATJ-5000NPressure Conversion FunctionPeel/Pressure Data Import Function A pressure conversion function is available for installment to the force gauge, helps with productivity improvement in the inspection process. The force value is automatically converted and displayed in pressure units. Units: Pa / kPa / N/m2, etc. available for selection. The function can directly send data in pressure units into the software the “Force Logger Next (downloadable)” available with the “Peel/Pressure Data Import Function”. For management of the peel force/pressure data,...

Open the catalog to page 3

IMADA.CO.,LTD Tensile Adhesion Test Jig TATJ-5000N [Cautions] - Information in this document is subject to change without prior notice. - This document is product descriptions and handling precautions, and do not guarantee various characteristics or safety. - This product is designed for force measurement purpose only. - Do not copy and use this content without authorization. - A force gauge (sold separately) is required to use this product. - Some samples may not be suitable to measure with this product. 99 Jinnoshinden-cho aza Kanowari Toyohashi Aichi Japan 441-8077 Tel: +81-(0)532-33-3288...

Open the catalog to page 4

All IMADA catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list