IMADA CO., LTD. Surface Coating Pull-Off Test Fixture TH-1000N/5000N Surface Coating Pull-Off Test Fixture TH-1000N / TH-5000N - Measures adhesion strength of the coating by bonding a test dolly on coated surface and pulling off - Performs testing according to the corresponding part of JIS K 5600-5-7 (2014) (TH-1000N-7 only) - JIS K 5600-5-7 (2014) [Testing methods for paints - Part 5: Mechanical property of film - Section 7: Adhesion test (Pull-off methods) ] (corresponding part only) * Depending on the sample, the specified test speed requirements may not be achievable. For details, please refer to the relevant JIS standards published by the Japanese Industrial Standards Committee.

FORCE MEASUREMENT FORCE MEASUREMENT Surface Coating Pull-Off Test Fixture TH-1000N/5000N Measuring Procedures Bond the dolly on the surface of the testing sample. Fix the sample with the bottom plate. Attach the dolly with the pin and start testing. *1 Weight of the attachment is also applied as a load on the force gauge. Consider it when selecting the capacity of a force gauge. * Adhesive is not included (Cyanoacrylate, two-component solventless epoxide and peroxide- catalyzed polyester adhesives have been found suitable in most cases).

FORCE MEASUREMENT FORCE MEASUREMENT Surface Coating Pull-Off Test Fixture TH-1000N/5000N Testing up to 1000N according to a part of JIS K 5600-5-7(2014) Digital Force Gauge: ZTS-1000N Motorized Test Stand: MX2-1000N-V75 Optional Software: Force Recorder Standard 121 Digital Force Gauge: ZTS-1000N Motorized Test Stand: MX2-1000N-V75 Optional Software: Force Recorder Standard 21 Digital Force Gauge: ZTS-5000N Motorized Test Stand: MX2-5000N Optional Attachment: TH-5000N-20 Optional Attachment: UJ10-5000N Optional Cable: CB-528 Optional Software: Force Recorder Standard 21 * Refer to the specification...

FORCE MEASUREMENT FORCE MEASUREMENT Surface Coating Pull-Off Test Fixture TH-1000N/5000N

IMADA CO., LTD. Surface Coating Pull-Off Test Fixture TH-1000N/5000N [Cautions] - Information in this document is subject to change without prior notice. - This document is product descriptions and handling precautions, and do not guarantee various characteristics or safety. - This product is designed for force measurement purpose only. - Do not copy and use this content without authorization. - A force gauge (sold separately) is required to use this product. - Some samples may not be suitable to measure with this product. 99 Jinnoshinden-cho aza Kanowari Toyohashi Aichi Japan 441-8077 Tel: +81-(0)532-33-3288...