Motorized Test Stand MX2-500N/1000N/2500N/5000N - Achieves high repeatability with constant testing speed and position - Easy digital setting of testing modes and speed - Offers useful functions operated together with force gauge * Requires certain models of force gauge and optional cable.

IMADA CO., LTD. Motorized Test Stand MX2-500N/1000N/2500N/5000N [Application Example and Configurations] [Stroke Limit] Set limits of stroke easily with these knobs. [Optional Cable] Connects force gauge and test stand to activate a variety of control functions. [Head] Operates upward and downward with mounted force gauge. [Force Gauge] Measures compression, tensile, peel strength, etc. Mountable to test stand with screws. [Table] Attachments or testing samples can be mounted on the table. Dimension: W200 x D100mm [Optional Attachments] Integral components to complete a testing system, selectable...

Motorized Test Stand MX2-500N/1000N/2500N/5000N [Basic Operations] Adjusting speed Testing speed is easily adjustable with dial. Setting resolution: Adjustable speed types: Start, Measuring, Return Three measuring Three testing modes are available to meet requirements. • Manual mode: Moves while up/down buttons are pressed. • JOG mode: Minute feeding by turning dial (approx. 0.05mm per 1 turn) • Cycle mode: Travels between stroke limit knobs for cycles. Other functions Cycle mode allows to set the number of tests to repeat and pausing time. Counter (number of tests to repeat): Max. 65535 times...

IMADA CO., LTD.Motorized Test Stand MX2-500N/1000N/2500N/5000N [Specifications] Model

IMADA CO., LTD.Motorized Test Stand MX2-500N/1000N/2500N/5000N *1 When applying force to highly elastic samples such as springs, the speed may decrease by a few percent. *2 This value is the distance between the test stand table and the tip of force gauge measuring shaft when the head is in the uppermost position. (MX2-500N/1000N: When up to 1000N model of ZTS/ZTAseries, MX2-2500N/5000N: When over 2500N model of ZTS/ZTA series is mounted.) *3 Connection to a compatible force gauge (ZTS/ZTA/eZT/FA Plus2/eFA Plus2 series) with a dedicated cable is required. *4 It does not guarantee complete prevention...

IMADA CO., LTD. Motorized Test Stand MX2-500N/1000N/2500N/5000N [Related Products] Digital Force Gauge ZTS/ZTA series Digital force gauge capable of measuring at a sampling rate of 2000 Hz. Connection with MX2 series by the dedicated cable enables interlinking functions. Interlocking shield option for motorized test stand OP-MX2 series This shield prevents debris of test sample from scattering, and stops operation when the door is open for more safety. *1 Standard Type Vertical Motorized Test Stand MX3-500N Advanced Type Vertical Motorized Test Stand EMX series Updated Standard Type Test Stand...

Motorized Test Stand MX2-500N/1000N/2500N/5000N Grip mounting adaptor, GF-1/GF-2, is depicted on the front view and the side view but not on the top view of MX2 series Dimensions.“M6” or “M10 (for 1000N or higher models)” on the front view and the side view are for attachment installation and “M8” on the top view indicates the position of holes for the screw to fix the grip mounting adaptor to the stand. * Mounting block (sold separately) is required when mounting DPUH-1000N to 5000N.

* Mounting block (sold separately) is required when mounting DPUH-1000N to 5000N. * The stroke of MX2-5000N (-EXT) has lower limit. It depends on each of force gauges and load cells.

IMADA CO., LTD. Motorized Test Stand MX2-500N/1000N/2500N/5000N [Cautions] - Information in this document is subject to change without prior notice. - This document is product descriptions and handling precautions, and do not guarantee various characteristics or safety. - This product is designed for force measurement purpose only. - Do not copy and use this content without authorization. - A force gauge (sold separately) is required to use this product. - Do not use this product in the environments including fierce temperature changes, high temperature, high humidity, near water, dusty place....