IMADA CO.,LTD Torque Gauge Table Attachments DT-TB/DT-ST/HT-ST series Torque Gauge/ Motorized Torque Stand Table Attachments The table attachment holding the sample with the four pins. The pins can be changed depending on the sample. How to mount the tables HTGA/HTGS/eHT series Turn screw by attached L wrench DTXA/DTXS series MTS series (the upper chuck attachment) Mount the suitable chuck attachment for the measurement needs 1. Move the included in main shaft in MTS series to the place the user works smoothly. Main shaft Move the O ring of the attachment and Insert the attachment at the tip of main shaft and insert the pin extracted at Step 3. 4. Back the O ring to the first position. We accept custom orders of creating original attachments for the sample.

IMADA CO.,LTD Torque Gauge Table Attachments DT-TB/DT-ST/HT-ST series Standard table (for DTX series） Standard table table and the pins at purchase. The table is available for φ20mm~φ160mm samples such as PET bottles, cans, bins and so on. Capacity: 10N-m. Allowable sample diameter： φ20mm~φ160mm Standard pin Material: Stainless-steel and Urethane Ideal for slippery samples such as aluminum cans, plastic containers and so on. Capacity: 10N-m. Notch pin Allowable sample diameter： φ20mm~φ160mm Material: Stainless-steel Ideal for tall samples such as circuit boards, camera lenses, liquor bottles...

IMADA CO.,LTD Torque Gauge Table Attachments DT-TB/DT-ST/HT-ST series [Dimensions] Sample stage TB-SP (for DTX series standard table) Feature The stage making samples stable. [Using image] Put the stage under the sample.

IMADA CO.,LTD Torque Gauge Table Attachments DT-TB/DT-ST/HT-ST series Small table(DTX series, HTG series or MTS series upper chuck attachment) Small table table and the pins at purchase. Ideal table attachment for small sample opening torque such as an eye drop bottle, a key and so on. Capacity : 5N-m Allowable sample diameter: φ7mm~φ50mm Standard pin Material: Stainless-steel and Urethane Ideal pin for holding sample tightly. Especially, for a connector. Capacity : 5N-m Allowable sample diameter: Notch pin φ7mm~φ50mm Material: Stainless-steel Ideal for cosmetic bottles, doorknobs, electric...

IMADA CO.,LTD Torque Gauge Table Attachments DT-TB/DT-ST/HT-ST series [Dimensions] (Unit: mm) [HT-ST](Small table for HTG/eHT series) [DT-ST](Small table for DTXS/DTXA series) [MT -ST](Small table for MTS series) ST-P

IMADA CO.,LTD Torque Gauge Table Attachments DT-TB/DT-ST/HT-ST series [Cautions] - The contents may be changed without previous notice. - All of products are designed for measurement purpose only. - Do not copy and use this content without authority. - Please note if you add load over capacity, its sensor would be broken down.