IMADA CO., LTD Torque gauge and Motorized Torque Stand Attachments Torque Gauge/ Motorized Torque Stand Attachments Exchangeable attachments for Torque Gauges. It helps various torque measurement such as screws, bolts and the sample durability. [Compatible Model List] HTGA/HTGS/eHT Compatible series Torque gauge DTXA/DTXS series MTS series Upper attachment Sample Examples Stranded wire, component sliding 9.5 Socket holder Bolt tighten/ loosen torque etc. To page 4 Torque driver Screw tighten / loosen torque etc. To page 5 Standard chuck Screw-cap torque test, N/A Circuit board twisting test etc. An adaptor for mounting jigs

IMADA CO., LTD Torque gauge and Motorized Torque Stand Attachments How to mount the attachment HTGA/HTGS/eHT series Turn screw by attached L wrench DTXA/DTXS series MTS series (the upper chuck attachment) Mount the suitable chuck attachment for the measurement needs 1. Move the included main shaft in MTS series to the place the user works smoothly. Main shaft Move the O ring of the attachment and Insert the attachment at the tip of main shaft and insert the pin extracted at Step 3. 4. Back the O ring to the first position. We accept custom-orders of creating original attachments for the sample....

IMADA CO., LTD Torque gauge and Motorized Torque Stand Attachments □Pin chuck Feature The three claws clamp samples such as wire and round-bar samples. [Model list for HTGA/HTGS/eHT series] Model HT-DC-4 HT-DC-6.5(*1) HT-DC-6.5SUS(*1) HT-DC-13(*2) Maximum 5N-m 10N-m 10N-m 10N-m torque Mount on HTG Opening series sensor φ0.5mm~4mm φ0.5mm~6.5mm φ0.5mm~6.5mm Φ1.2mm~13mm width part. Weight Approx.100g Approx.200g Approx.190g Approx.600g Material Steel Steel Stainless-steel(*3) Steel [Model list for DTXA/DTXS series] Model DT-DC-4 DT-DC-6.5 DT-DC-6.5SUS DT-DC-13 Maximum 5N-m 10N-m 10N-m 10N-m torque...

IMADA CO., LTD Torque gauge and Motorized Torque Stand Attachments □Socket holder HT-9.5SQ Feature Varieties of torque measurements using a tool such as a screwdriver bit and a wrench are possible. Using image Step 3: Mount the Step 2 Step 4: Twist a bolt with socket holder. torque sensor. [Model list for HTGA/HTGS/eHT series] Model

IMADA CO., LTD Torque gauge and Motorized Torque Stand Attachments □Torque driver HT-DBH Feature Measure tighten and loosen screw torque with the included screwdriver bit. Using Image Step 1: Prepare the torque driver Step 2: Insert the driver bit to the torque driver properly. Step 3: mount the Step 2 torque Step 4: Twist a screw and measure driver on the torque sensor. Included screwdriver bits [Model list for HTGA/HTGS/eHT series] Model

IMADA CO., LTD Torque gauge and Motorized Torque Stand Attachments □Standard chuck ( for MTS series) Standard chuck Holds the sample with stable force by using a torque driver. Capacity: 10N-m Allowable sample diameter: φ20mm~φ90mm *Please feel free to contact us when you need to purchase only the pins. (+81- (0)532-33-3288) *A torque driver is NOT included. Stable holding force by using with a torque driver Using image The high repeatable measurement is possible by Opening test of a bottle fastening the M5 screw at the center of the handle to keep the holding force stably. [Dimension](Unit:...

IMADA CO., LTD Torque gauge and Motorized Torque Stand Attachments M10 adaptor Feature The adapter for mounting an original jig by the customers. The customers can use their own jig to measure torque. [Model list for HTGA/HTGS/eHT series] Model [Model list for MTS series] *The upper side attachment of MTS series [Cautions] - The contents may be changed without previous notice. - All of products are designed for measurement purpose only. - Do not copy and use this content without authority. - Please note if you add load over capacity, its sensor would be broken down.