*mydirectindustry

Catalogs
IMADA
Specification list of cables

Specification list of cables

Product catalog summary

Overview: This document from IMADA Co., Ltd. provides detailed specifications and options for communication cables used to connect force gauges, torque gauges, or amplifiers to external devices and test stands. It includes various cable types, their compatible devices, and customization options.

1. Cables for External Device Connection:

Analog Cables: Models CB-108 and CB-118 connect gauges to analog devices like pen recorders and oscilloscopes, outputting voltage. Length: Approx. 3m.
RS232C Cables: Models CB-203 and CB-208 enable data recording and operation from external devices, with a D-Sub 9-pin connector. Length: Approx. 3m.
Digimatic Cables: Model CB-308 connects to Mitutoyo Digimatic Printers for printing measured values. Length: Approx. 3m.
External Contact Point Cables: Model CB-808 allows adding contact point changes to measurement data. Length: Approx. 3m.
Open End Cables: Model CB-908 provides all input/output functions with open ends for custom connections. Length: Approx. 3m.
Cable with Terminal Block: Model CTB-A includes a terminal block for easy connection to external devices. Length: Approx. 1m.

2. Cables for Test Stand Connection:

Force Control Cables: Models CB-508 and CB-528 activate test stand functions like overload stop and force control. Length: Approx. 1.5m.
Displacement Cables: Models CB-718 and CB-728 activate test stand functions including displacement I/O. Length: Approx. 1.5m.

3. Customization Options:

Cable Length Extension: Standard cables can be extended up to specified maximum lengths.
RS232C Split Cable: Allows simultaneous connection to test stands and external devices.
Connector Type Changes: Options to change connector types for compatibility with different devices.

4. Cables for Old Model Devices: Includes analog, RS232C, and Digimatic cables for older models like DS2, ZP, Z2, HTG2, and DTX2.

5. Custom Solutions and Cautions:

Custom-made solutions are available for using multiple cables simultaneously.
Specifications are subject to change, and combinations of devices are not guaranteed without checking individual specifications.

Contact Information: IMADA Co., Ltd., Toyohashi, Aichi, Japan. Email: [email protected], Website: https://www.forcegauge.net/en/

Catalog excerpts

IMADA CO., LTD Communication Cables Communication Cables -A wide range of cable to meet the needs of variable measurement -Custom made options available to meet your measurement needs - Cables to Connect a Force Gauge, Torque Gauge or Amplifier to External Devices [ 1. Analog Cable ] *1 Usable for ZTA/S, eZT, HTGS/A, DTXA/S limited with their firmware older than Ver.5.

Open the catalog to page 1

IMADA CO., LTD Communication Cables [ 4. External Contact Point Cable ] *1 Mitutoyo Digimatic output which is only available on models with firmware versions prior to the Next Series (firmware versions earlier than 5.00) is not supported. *2 Insertable cable size for CTB-A. (single cable 90.5~1.6, standard cable 90.08~1.255mm2, AWG28~16) *3 For the Linier-Scale DMK. Please use the Open End, loose wire specification.

Open the catalog to page 2

IMADA CO., LTD Communication Cables - Cables to Connect Force Gauge, Torque Gauge or Amplifier to IMADA’s Test Stands [ 1. Force Control Cable ] *1 As an option, it is possible to use the length extended Cable. Refer to page 5 for details.

Open the catalog to page 3

IMADA CO., LTD Communication Cables[Compatible Gauges List] *1 From the ZTA, ZTS, and FA Plus 2 series, supported products are limited to the specifications option with -AN. *2 Data output from ZTA/S, eZT, HTGA/S, DTXA/S, FA Plus2, or eFA Plus2 to RS232C printer is supported only for products with firmware Ver. 3.10 or later; For Next Series products, "RS232C Print Function" must be installed via network. *3 Usable for ZTA/S, eZT, DTXA/S, HTGA/S limited with their firmware older than Ver.5.

Open the catalog to page 4

IMADA CO., LTD Communication Cables [Specification Changes Options] *1 The overall length is including the Standard Cable Length. To maintain the signal quality, the overall connecting Cable Length for the load cell and the display unit must be limited. *2 The overall Cable Length required entered to (_)m. It should be Standard Cable Length, plus the length for extension in [Selecting Model] T Please add the code of connector type change or the RS232C sprit cable. '- E.g.) -OC, -RS, -RS-25PM., etc. (If not changed, no need to enter) For the cable length extension, please indicate the overall...

Open the catalog to page 5

IMADA CO., LTD Communication Cables * Different cables are not able to connect to the same connector. We offer custom made options to allow using two different cables at the same time.

Open the catalog to page 6

IMADA CO., LTD Communication Cables [Custom made solution] - Different cables are not able to connect to the same connector. We offer custom-made options to allow using two different cables at the same time. - There is a limit to the overall length of the extension. Please contact us for details. [Cautions] - Information in this document is subject to change without prior notice. - This specification does not guarantee the possible combinations of test stands, force gauges, load cells, and torque testers. Please refer to the individual specifications for combination details. - This document is...

Open the catalog to page 7

Specification list of cables

Specification list of cables

Catalog excerpts

All IMADA catalogs and technical brochures

Archived catalogs