Catalogs >
IMADA >
SJS-100N-L/S

SJS-100N-L/S
5Pages

Catalog excerpts

IMADA Co., Ltd. Alignment stage for solder joint strength test SJS-100N-L/-S Alignment stage for solder joint strength test SJS-100N-L/S - Stage for fixing a PCB for solder joint strength test - The stage angle switchable to 45 or 90 degrees How to Install the Test Sample (and SJS-1000N-L and SJ-QFP-01) Fix sample to SJS-1000N-L. Adjust position of hook tip with XY stage. Hook the soldered part to start testing. How to Install Test Sample (SJS-1000N-S and SJ-TIP-03) Fix sample to SJS-1000N-S. Adjust position of jig tip with XY stage. Push the soldered part with jig to start testing.

Open the catalog to page 1

IMADA Co., Ltd. Alignment stage for solder joint strength test SJS-100N-L/-S Specifications Use Model Capacity Dimension For mounting large sample SJS-100N-L Weight *1 Moving distance of XY stage For mounting small sample SJS-100N-S 100N Refer to the Dimension Approx. 2.8kg +/-30mm *1 Weight of the attachment is also applied as a load on the force gauge. Consider it when selecting the capacity of a force gauge. * Two clampers and two knobs are included. Examples of Product Configuration SJ-QFP-01 Example 1 Code: 1S2008A IEC 62137-1-1:2007 Surface mounting technology - Environmental and...

Open the catalog to page 2

IMADA Co., Ltd. Alignment stage for solder joint strength test SJS-100N-L/-S [PCB fixing stage, Sample Clamper and Knob] The parts below are also available for replacement. Model Included Parts Sample Clamper and Knob SCK-PRT Installation image * This set of parts is sold in two pairs per order, not sold individually. For enlarging the detailed work Magnifying glass enlarges the magnification to 2x or 4x and the neck angle can be adjusted freely, which improves the work efficiency. 4x Rotate 360 degree Adjust the arm direction Pull in the direction of the arrow to remove Goose Neck...

Open the catalog to page 3

IMADA Co., Ltd. Alignment stage for solder joint strength test SJS-100N-L/-S Related Products Chip shear jig SJ-TIP-01 For 45-degree pull strength test of solder joints complying with the corresponding part of IEC and JIS standards For 90-degree shear strength test of solder joints complying with the corresponding part of JIS standard Tip diameter: 0.25mm For 90-degree shear strength test of solder joints complying with the corresponding part of IEC and JIS standards Tip diameter: 2mm Chip peel Fixture GT-10/20 Ideal for shear test of electric components (Capacity: 500N) For 90-degree shear...

Open the catalog to page 4

IMADA Co., Ltd. Alignment stage for solder joint strength test SJS-100N-L/-S * The depth depends on the grip position of board and Y-axis position of the stage. Contact us for further details. [Cautions] - The contents may be changed without prior notice. - A force gauge (sold separately) is required to use this product. - This product is designed for force testing only. Do not use it for any other purposes. - Some samples may not be suitable to measure. - Do not copy and use this content without authority. 99 Jinnoshinden-cho aza Kanowari Toyohashi Japan 441-8077 TEL: +81-(0)532-33-3288...

Open the catalog to page 5