Catalogs >
IMADA >
SJ series

SJ series
6Pages

Catalog excerpts

IMADA Co., Ltd. QFP lead hook/Chip shear jig SJ series QFP lead hook/Chip shear jig for solder joint strength test SJ series - Designed to measure tensile strength and shear strength of solder joint - Complies with the corresponding part of IEC and JIS standards - Chip shear jig selectable from 4 types of tip width Related Standards -IEC 62137-1-1:2007 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-1: Pull strength test (Corresponding part only) (Japanese Standards: JIS C 62137-1-1: 2010) (Corresponding part only) -JIS Z 3198-6: 2003 Test methods for lead-free solders Part 6: Methods for 45°pull test of solder joints on QFP lead (Corresponding part only) -JIS C 60068-2-21: 2009 Environmental testing-Part 2-21: Tests-Test U: Robustness of terminations and integral mounting devices (Corresponding part only) -JIS Z 3198-7: 2003 Test method for lead-free solders-Part 7: Method for shear strength of solder joints on chip components (Corresponding part only) -IEC 62137-1-2:2007 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-2: Shear strength test (Corresponding part only) (Japanese Standards: JIS C 62137-1-2: 2010) (Corresponding part only)

Open the catalog to page 1

IMADA Co., Ltd. QFP lead hook/Chip shear jig SJ series How to Install the Test Sample (SJ-QFP-01 and SJS-1000N-L/S) Fix sample to SJS-1000N-L/S. Adjust position of hook tip with XY stage. Hook the soldered part to start testing. How to Install Test Sample (SJ-TIP-03 and SJS-1000N-L/S) Fix sample to SJS-1000N-L/S. Adjust position of jig tip with XY stage. Push the soldered part with jig to start testing. For 45-degree pull strength test of solder joints SJ-QFP-01 For 90-degree shear strength test of solder joints (tip For 90-degree shear strength test of solder joints (tip For 90-degree...

Open the catalog to page 2

IMADA Co., Ltd. QFP lead hook/Chip shear jig SJ series Examples of Product Configuration SJ-QFP-01 Example 1 Code: 1S2008A IEC 62137-1-1:2007 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-1: Pull strength test (Corresponding part only) (Japanese Standards: JIS C 62137-1-1: 2010) (Corresponding part only) (For large sample) Digital force gauge: ZTS-100N Motorized test stand: EMX-500N-L Optional attachment: SJ-QFP-01 Optional attachment: SJS-100N-L Optional attachment: XST-500N Optional cable: CB-528 Optional software: Force...

Open the catalog to page 3

IMADA Co., Ltd. QFP lead hook/Chip shear jig SJ series Related Products Alignment stage for solder joints strength test SJS-100N-L/S Designed for fixing a PCB to test pull and shear strength of solder joints to adjust in the XY-axis direction finely and change the angle to 45 degrees or 90 degrees Small Grip SC-3/8 Ideal for measurement of thin samples such as leads of electronic component in a small area X-Axis slide table XST-500N Designed to move and adjust in the X-axis direction easily Chip peel Fixture GT-10/20 Ideal for shear test of electric components (Capacity: 500N) Pantograph...

Open the catalog to page 4

IMADA Co., Ltd. QFP lead hook/Chip shear jig SJ series

Open the catalog to page 5

IMADA Co., Ltd. QFP lead hook/Chip shear jig SJ series [Cautions] - The contents may be changed without prior notice. - A force gauge (sold separately) is required to use this product. - This product is designed for force testing only. Do not use it for any other purposes. - Some samples may not be suitable to measure. - Do not copy and use this content without authority. 99 Jinnoshinden-cho aza Kanowari Toyohashi Japan 441-8077 TEL: +81-(0)532-33-3288 FAX: +81-(0)532-33-3866 E-mail: info@forcegauge.net Website: http://www.forcegauge.net/en/ Visit our website for more information on wide...

Open the catalog to page 6