Simple Type Horizontal Motorized Test Stand MH-1000N

Product catalog summary

Applications
The Motorized Test Stand MH-1000N is designed for various material testing up to 1000N, including tensile, compressive, and shearing strength measurements. It is also used for analyzing mechanical parts for break points and measuring the peeling force of glued materials or heat seals.

Features
The test stand offers stable measuring with a feed screw mechanism, a horizontal design for easy sample handling, and stable speed motion. It includes overload protection and force control when connected with a digital force gauge. Optional features include a speed/length meter for measuring travel distance and speed.

Main Options
Options include a Speed/Length Meter (-E), Length Scale (-S), and various speed range changes (-V) to accommodate different testing requirements.

Specifications
The MH-1000N model has a capacity of 1000N, speed range of 6 to 180mm/min, and a maximum sample height of approximately 280mm. It operates in manual, single cycle, and continuous cycle modes, with emergency stop and overload protection features. The operating temperature is 0 to +40 degrees Celsius, with a humidity range of 35 to 70%.

Mountable Force Gauges
Compatible with mechanical force gauges (FB, PS, PSM series) and digital force gauges (DST, DSV, ZTS, ZTA series up to 1000N). Higher capacity models are not supported.

Cautions
The document notes that specifications are subject to change and emphasizes that the product is designed solely for force measurement. It advises against use in extreme environmental conditions and states that a separate force gauge is required.

Contact Information
IMADA CO., LTD, 99 Jinnoshinden-cho aza Kanowari Toyohashi, Japan 441-8077. Tel: +81-(0)532-33-3288, Fax: +81-(0)532-33-3866, Email: [email protected], Website: https://www.forcegauge.net/en/

Catalog excerpts

Simple Type Horizontal Motorized Test Stand MH-1000N-1

Motorized Test Stand MH-1000N [Applications] • Various material testing up to 1000N. (Measuring of tensile strength, compressive strength, shearing strength and etc.) • Analysis of mechanical parts for break point and free fit. • Measure peeling force of glued material or heat seals. • Stable measuring by feed screw features with small step of the travel length. • Horizontal design makes easy to handle a sample. • Motion in stable speed. • Body structure helps to avoid a sample fragment from getting inside of the device. • Optional speed/length meter enables to measure travel distance and speed. • Overload protection and force control connecting with digital force gauge. • Compatible with IMADA digital and mechanical force gauges (except high capacity models).

Open the catalog to page 1

Simple Type Horizontal Motorized Test Stand MH-1000N-2

Motorized Test Stand MH-1000N * Load cells not listed cannot be mounted on any of our test stands. * Ensure to use within the capacity of force gauge and test stand regardless of the mountable models.

Open the catalog to page 2

Simple Type Horizontal Motorized Test Stand MH-1000N-3

IMADA CO., LTD. Motorized Test Stand MH-1000N [Cautions] - Information in this document is subject to change without prior notice. - This document is product descriptions and handling precautions, and do not guarantee various characteristics or safety. - This product is designed for force measurement purpose only. - Do not copy and use this content without authorization. - A force gauge (sold separately) is required to use this product. - Do not use this product in the environments including fierce temperature changes, high temperature, high humidity, near water, dusty place. 99 Jinnoshinden-cho...

Open the catalog to page 3