IMADA CO.,LTD Special Use Load Cell PK1-500N/PK2-1500N Load cell for Two-wheeler Handbrakes PK1-500N Load cell for Vehicle Foot Pedals PK2-1500N Measure force acting on foot pedals or handbrakes. You can simply clip or mount on the load cell to perform measurements. Setting image *Grip the load cell and the brake together to measure force after mounting. Setting image *Clip a load cell onto a pedal and step them on together to measure force. What is IP? IP(International Protection) is a standard which is based on IEC Standard 529 for solid foreign materials, electric devices for water and cabinet. IP65 The second code (IP 0 to 8 for water penetration) The first code (IP 0 to 8 for human body and sold foreign materials) Water projected in powerful jets (12.5 mm nozzle) against the enclosure from any direction shall have no harmful effects at least for 3 minutes 100 liter per minute. No ingress of dust; complete protection against contact (dust tight) ：eZ-Connect series eZ-Connect is composed of an amplifier and load cells. Enables to replace load cells without additional adjustment. Suitable for different types of tests such as tension and torque, measuring from low load to high load etc. Available load cells have a mark

IMADA CO.,LTD * An amplifier (indicator) is required to read values. Please refer to below “Available amplifiers (indicators)” for the detail. *1 The accuracy is only load cell itself. Please refer to below “Separated Sensor Model” and “eZ-Connect series” for the accuracy of combinations with the amplifier (indicator). *2 IP65 is only approved for the load cell itself. The amplifier (indicator) and the connector parts are not approved. *3 Refer to specification of [Options Available for Load cell Cable] to change cable length or so. [Connector Type] * When ordering only the load cell, PK1-500N...

IMADA CO.,LTD Special Use Load Cell PK1-500N/PK2-1500N [Separated Sensor Model] *1 Total accuracy when combined with the eZ-Connect series amplifier. e.g. Total accuracy of eCLFX and eZT +/-1.2%F.S. or less (Load cell: +/-1.0%F.S. or less + Amplifier: +/-0.2%F.S. or less) * Please refer to the accuracy of the sensor of eZ-Connect in the Specifications table. Coin shaped type High accuracy coin shaped type Standard type Coin size load cell for compression. High accuracy built-in type load cell for general use. High accuracy coin shaped load cell for compression. Extra small type Optional cables...

IMADA CO.,LTD Special Use Load Cell PK1-500N/PK2-1500N - Information in this document is subject to change without prior notice. - This document is product descriptions and handling precautions, and do not guarantee various - This product is designed for force measurement purpose only. - Do not copy and use this content without authorization. - Do not apply force more than its capacity or from incorrect direction to the measuring shaft. - Do not use this product in the environments including fierce temperature changes, high temperature, high humidity, near water, dusty place. 99 Jinnoshinden-cho...