IMADA CO.,LTD. 180-degree Peeling Tester IPTS-5N 180-degree Peeling Tester IPTS-5N - Enable accurate data Graphing with 2000Hz sampling rate with easy operation - Handles a wide range of test speed up to 1500 mm/min - Interlocking Shield is available as an optional equipment for safety Features Accurate graphing One-click operation It captures rapid force change due to its high sampling rate (2000Hz) for high repeatability. Simply press the START button to start the test. It peels the sample to the set stroke (peel length). Automatic recording Visual analysis It can automatically record, graph and save data when testing. It can overlay up to 5 graphs to allow easy comparison. It can automatically calculate Max/Min/Ave values of each graph. [Evolution to the Next Series] Next Series is a generic term for IMADA measurement devices with upgraded functions and performances with the essential modifications. The devices enable to install additional functions from the user support site, IMADA-Connected. On the website, related data such as software and instruction manuals can also be downloaded. New Series: IPTS-5N Firmware Ver.5 or later. New Features -Increased measurement stability achieved from further noise reduction of the measurement circuit. Internal analog wave comparison Yellow: Next series/Green: Old Model - Measurement device program (firmware) online updates available. - Various software and additional functions downloadable to increase the measurement conveniences. IMADA Connected (https://www.imada-connected.com/) 1 / 7 2024/11/29

IMADA CO.,LTD. 180-degree Peeling Tester IPTS-5N [Related Standards] IEC 60286-3:2022 Packaging of components for automatic handling-Part 3: Packaging of IEC/JIS standards for peel test of embossed carrier tape surface mount components on continuous tapes. (Partly) JIS C0806-3:2021 Packaging of components for automatic handling-Part 3: Packaging of surface mount components on continuous tapes. (Partly) [Main functions] [Test conditions] - Peel length [Sample fixing] - Center line Attach the sample straight along with the center line and fix it with sample clip. - Load cell height adjustment Easily...

IMADA CO.,LTD. 180-degree Peeling Tester IPTS-5N [Main functions of supplied software] [Basic operation] - Save graphs automatically [Advanced operation] - Overlay graphs It enables automatic graphing and data saving by using trigger function. Max. 5 graphs can be overlaid. It can be printed and output in desired format. - Switch graphs with plural tabs - Zoom graph The recorded graphs can be displayed in plural tabs. Simply click and drag to specify an area to zoom-in. The Max, Min, and Ave. values of the selected area are displayed. It allows you to print or output in desired format. - Add...

IMADA CO.,LTD. 180-degree Peeling Tester IPTS-5N Specifications Model Capacity Resolution Accuracy Overload Sampling rate Test speed Stroke (length) Peel angle Max. sample width Max. sample thickness Safety device Power Weight Operating environment Accessories IPTS-5N 5N 0.001N +/-0.2%F.S. +/-1digit Approx.150% F.S (It warns with buzzer and light flashing when the force is over 110% of capacity.) Max.2000 data / sec (2000Hz) 120, 200, 300, 500, 1000, 1500mm/min (Switchable) Travel of load cell: Approx. 400mm (Peel length: Approx.200mm) 165°-180° (Height and angle are adjustable.) Adhesion: 88mm...

IMADA CO.,LTD. 180-degree Peeling Tester IPTS-5N [Downloadable Graphing Software Option] Downloadable Force-Time Graphing Software -NEXT With this option, Downloadable Graphing Software Force Recorder Next Standard is included instead of CD version Graphing Software Force Recorder Standard. *1 Please add the code to the end of model. Example: IPTS-20N-NEXT - High-speed communication of up to 2000 times/second achieves high accuracy load-time graphs. - The measurement results recorded and analyzed efficiently with an enforced range of preset functions. - Data analysis functions for various graph...

IMADA CO.,LTD. 180-degree Peeling Tester IPTS-5N [Related Test] Breaking tensile strength test of cover tape’s film to check whether it meets the requirement of IEC 602863(2022) and JIS C0806-3(2021) Pull strength test of solder joints complying with the corresponding part of IEC 62137-1-1 (JIS C 62137-1-1) Digital force gauge: ZTS-200N Motorized test stand: MX2-500N-L Optional attachment: GC-60 (2 pieces) Optional cable: CB-528 Example1 Code: 1S2008A Digital force gauge: ZTS-100N Motorized test stand: EMX-500N-L Optional attachment: SJ-QFP-01 Optional attachment: SJS-100N-L Optional cable: CB-528...

IMADA CO.,LTD. 180-degree Peeling Tester IPTS-5N Interlocking shield (-IC option) [ISO Calibration Service and Calibration Certificate] ▪ We are the accredited ISO/IEC 17025:2017 Calibration Organization with the in-house Calibration Service facility. ▪ The Calibration Service and Issuing of the Calibration Certificates and Traceability Chart available at extra cost. ▪ For further information, please kindly contact the local authorized distributor or us. [Caution] ▪ Information in this document is subject to change without prior notice. ▪ This product is designed for force measurement purposes...