Standard Type Vertical Motorized Test Stand MX3-500N - Motorized Test Stand with a stable force application capacity of up to 500N - Enable highly reproducible tests with uniform test conditions in speed/force direction - Possible to control operation by force value (load keep, etc.) - Dedicated downloadable software included for setting/saving/loading test conditions *1 Includes download rights for the CS Test Preset Builder software. Refer to page 6 for details. *2 Connection with compatible force gauge via a dedicated cable is required. Refer to page 5 for details.

IMADA CO., LTD. Standard Type Vertical Motorized Test Stand MX3-500N [Product Configuration Example] [Optional Cable] * Dedicated Cable for connecting the motorized test stand and the force gauge. Connecting enables various Interlinking functions. [Force Gauge] * Force-measuring instruments for compression/tension force measurements. Mounted to the test stand head with included bolts. [Stroke limit Knobs] For the stroke limit setting. Tighten to fix the position. [Head] Force Gauge mounting unit. Moves up and down. [Linear Scale Unit] * Head Displacement measurement sensor. Available with the...

IMADA CO., LTD. Standard Type Vertical Motorized Test Stand MX3-500N [Basic Operations] Test Modes: Automatic and Manual [Auto Test Mode] Auto Test Mode settings enable automatic movement of the head within the set stroke limits, utilizing the force value operation controls (with specified force values: stop, reverse, hold, etc.) and repeat settings, which can be configured with the required number of repeats and stops. * ■ Speed Settings for Auto Test Mode The speed settings are available within the range of 10 to 300 mm/min for the measurement Forward, Measuring, and Return. Refer to the [Product...

Standard Type Vertical Motorized Test Stand MX3-500N *1 The speed unit: in/min is also available only in international model. (0.40 to 11.80 in/min [Setting in 0.02 in/min increments]) *2 This value is the distance between the test stand table and the tip of force gauge measuring shaft when the head is in the uppermost position. (When up to 1000N model of ZTS/ZTA series is mounted.) *3 Connection with a compatible force gauge by a dedicated cable is required. Refer to the [Force gauge Interlinking function] *4 It does not guarantee complete prevention of failure from overloads. *5 Test Stand...

IMADA CO., LTD.Standard Type Vertical Motorized Test Stand MX3-500N[Mountable Force Gauges] [Force gauge Interlinking function] Applicable with the dedicated force gauge and cable connections. * Load cells not listed cannot be mounted on any of our test stands. * Ensure to use within the capacity of force gauge and test stand regardless of the mountable models.

Standard Type Vertical Motorized Test Stand MX3-500N The software allows the Auto Test Mode testing condition settings from PC or Tablet devices. (*1, *2) Test Condition Test Steps

Standard Type Vertical Motorized Test Stand MX3-500N Grip mounting adaptor GF-1 is depicted on the front view but not on the top view and the side view of Dimensions. “M6” on the front view is for attachment installation and “M8” on the top view indicates the position of holes for the screw to fix the grip mounting adaptor to the stand. - Information in this document is subject to change without prior notice. - This document is product descriptions and handling precautions, and do not guarantee various characteristics or safety. - This product is designed for force measurement purpose only. -...