Test stand ------------------------------------------------------------------------------------------------------------------------------------------------- Motorized Test Stand Force gauge and speed/length meter are option.) Various material testing up to 500N (measuring of tensile strength, compressive strength, shearing strength and etc). Analysis of mechanical parts for break point and free fit. Stable measuring by feed screw features with small step of the travel length. Suitable for Imada brand digital and mechanical force gauges. Overload protection and force control connecting with digital force gauge (MX series only) Optional scale unit implements scaling its travel length.

Scale unit* Long stroke Attached Attached * Resolution: 0.01mm, Zero / Origin. Attached at factory, cannot be attached by customers. ** Resolution: 0.01mm, Attached at factory, cannot be attached by customers. Model number will be followed with below suffixes when you specify speed range. Suffix Speed range [MX-500N series specifications] Model Capacity Stroke Feeding method Travel speed Table Force gauge Single/Continuous cycle Overload protection Force control Dimensions Wight Accessories MX-500N 500N (Normal) 250N (Long stroke) Approx. 285mm (Normal) Approx. 485mm (Long stroke) Feed screw...

Crosshead Limit knobs Force gauge mount Operation panel Force gauge is not included with this test stand. Various optional attachments are available. “Overload protection” does NOT completely avoid every failure of the gauge. Please do not apply the load exceeding force of capacity. Please avoid rapid temperature change, high humidity, the water, the dust, and the strong shock. It may change without a preliminary announcement for improvement etc. MX-500N Updated on April 4, 201