IMADA CO., LTD. Motorized Torque Stand MTS series Standard Type Motorized Torque Stand MTS series Achieves more accurate measurement due to the constant rotation speed Operation control by the torque value and continuous rotating period A wide range of chucks/attachments available to fit your measurement requirement Operation Panel Speed setting dial Manual and Automatic Operation Displays the speed, counter, and timer - Speed range: 3 to 90 degrees/sec - Controls the rotation according to the torque values and rotating period Various Chucks - Select the attachment to fit your sample shape and materials. (Refer to the page 4) Operates in each direction of rotation Standard Chuck MT-TB (Separately sold) Switch manual and automatic modes Standard Table (Separately sold) Screw Cap Torque Tester DTXS/A series (Separately sold) [MTS Features] 1. Constant Rotation Speed Set the speed and press the start button for highly repeatable measurements at a constant test speed Start Buttons Manual Measurement Process Installed in the Torque Stand MTS series Accurate and highly repeatable measurements Speed Setting Dial 2. Automatic Operation The operation is controlled by the torque value and continuous rotating period (Stop and Reverse rotations) Comparator high value Automatic stop (at set rotation time) Start automatic mode testing Rotate (Forward) Rotate (Backward) e.g., When the set high value of the comparator is reached, the torque stand automatically stops and rotates backward. When the set continuous rotation time (backward rotation) is elapsed, it stops automatically.

IMADA CO., LTD. Motorized Torque Stand MTS series 3. Efficient Durability Test with Automatic Mode Repeats the set number of operations Automatically. Comparator value Rotation time Rotation speed Number of repetitions Start automatic measurement The Measurement Condition Setting The Data Output signal and the Zero-Reset signal can be automatically output to the screw cap torque tester for each measurement cycle. The data is sent to the software or the RS232C printer* automatically. * Data output from DTXS/DTXA to the RS232C printer available for the firmware Ver. 3.10 or later. For the Next...

IMADA CO., LTD. Motorized Torque Stand MTS series Maximum sample height For medium size samples Jam bottles, eye drop PET bottle (500ml), feeding bottles, drink bottles, etc. bottle, etc. PET bottle (1.5 liter or more) * We offer custom-made options to meet your requirements. Please contact us for more details. *1 Standard Chuck sold separately. *2 You may need an extension shaft to measure smaller samples when using MTS-10N-L and MTS-10N-2L. Refer to “How to select the extension shaft” below for more details. [How to select the extension shaft] For MTS-10N-L Sample height Required extension...

IMADA CO., LTD. Motorized Torque Stand MTS series Examples of Product Configuration MTS-10N Example Functional and advanced low range torque tests for capacity up to 2N-m Screw Cap Torque Tester: DTXS-2N-Z Motorized Torque Stand: MTS-10N Optional attachment: MT-ST Optional attachment: DT-STL Examples of Product Configuration MTS-10N-2L Example Functional and advanced tall sample torque tests for capacity up to 10N-m Screw Cap Torque Tester: DTXS-10N-TB-02 Motorized Torque Stand: MTS-10N-2L Optional attachment: MT-TB MTS-10N Product Configuration 1M4001A Image * When evaluating the relationship...

IMADA CO., LTD. Motorized Torque Stand MTS series [Additional Information] Tips for Appropriate Measurement - Fixing the sample with a constant force When measuring the opening/closing torque of jar or PET bottles, the force of gripping the sample affects the measured value. Therefore, it is necessary to grip the sample with a constant force. When fixing the sample with the standard chuck, tighten the M5 hexagon socket head cap bolt, at the knob center with a torque wrench or torque driver with a 4mm bit to tighten. Controlling the tightening force contributes to accurate measurement. [Related...

IMADA CO., LTD. Motorized Torque Stand MTS series * S1 and S2 are the maximum and minimum sample heights when a standard attachment (sold separately) and a standard table with standard pins are attached. Optional Extension Shaft MT-EXT Unit: mm * We offer longer shaft as custom-made options.

IMADA CO., LTD. Motorized Torque Stand MTS series [Cautions] - Information in this document is subject to change without prior notice. - This document is product descriptions and handling precautions, and does not guarantee various characteristics or safety. - This product is designed for force measurement purpose only. - Do not copy and use this content without authorization. - A torque gauge (sold separately) is required to use this product. - Do not apply torque more than its capacity or from incorrect direction to the sensor. - Do not use this product in environments including fierce temperature...