Catalogs >
IMADA >
LMU/LU/ZD series

LMU/LU/ZD series
7Pages

Catalog excerpts

IMADA CO.,LTD Load cell LMU/LU/ZD series Load cell LMU/LU/ZD series Ideal for a narrow space due to their small size and light weight Designed to integrate into facilities and mount a sample easily with screws on both ends of the sensor Model Capacity Force direction Screws Extra small type: LMU series Model 50N to 500N Small type: Small type: LU series Standard type: LM series 50N to 2000NLC series High capacity type: High capacity type: ZD series Convertible type for Convertible type for Exclusive type for Capacity 5000N to 20kN Compression and Tension10N to 20kN Compression and500N to 20kN tension Compression or Tension (*2) Male screw (M12P1.75) Male screw (M5) Female screw (M8) (20kN type: M20P1.5) Fixing shaft (*1) Images Testing shaft (*1) -High accuracy (+/0.5%F.S. or lower) * An indicator is required to read force values. Refer page 3 for the details. *1 The testing shaft is the male screw nearby the cable. The load cell should be set to be loaded. -High stability and *2 Choose the direction before purchase. -Extra small and silm type reliability due to airtight structure -Designed for high load measurements -Corrosion resistance due to stainless steel IP (International Protection) is a standard which is based on IEC Standard 529 for solid foreign materials, body electric devices for water and cabinet. How to Mounting or gluing on equipment IP×× IP67 fix The second code (IP 0 to 8 for water penetration) The first code (IP 0 to 8 for human body and sold foreign materials) Ingress of water in harmful quantity shall not be possible when the enclosure is immersed in water under defined conditions of pressure and time (up to 1m of submersion for 30 minutes.) No ingress of dust, complete protection against contact. : eZ-Connect series eZ-Connect is composed of an amplifier and load cells. -Allows easy replacement of load cells without additional adjustment -Suits different types of tests such as tension and torque, measuring from low load to high load etc. Available load cells have a mark -Suitable for range of tem 40 degree C +150 degre

Open the catalog to page 1

IMADA CO.,LTD Load cell LMU/LU/ZD series Installing in equipment LMU series Hanging on equipment / Hooking samples LU series LU series *1 Fixing shaft and testing shaft look similar. Ensure the side is correct. Keep the space between the surface of the sensor and attachment or equipment using your own M5 nut. *2 Conversion adapter, attachments and EB-500N-M8 are sold separately. * An amplifier (indicator) is required to read values. Refer page 3 “Available amplifiers (indicators)” for the detail. * For purchasing only loadcell, select the types of connector. Refer to the table on page 3. *1...

Open the catalog to page 2

IMADA CO.,LTD Load cell LMU/LU/ZD series * When purchasing, select the connector shape and add the code to the end of the load cell mode. e.g. For selecting 5pins: LMU-50N-5P Specification (eZ-Connect series) * Refer page 4 for eZ-Connect series details. *1 IP67 is only approved for the load cell itself. The amplifier (indicator) and the connector parts are not secured. Available Amplifiers (Indicators) Type * Refer to each indicator specification for the detail.

Open the catalog to page 3

IMADA CO.,LTD Load cell LMU/LU/ZD series [Models of sensors combined with indicators (Sensor separate models)] -LMU series *1 It is the accuracy of the sensor and indicators of eZ-Connect series combined.

Open the catalog to page 4

IMADA CO.,LTD Load cell LMU/LU/ZD series -Hoisting attachments and adapters

Open the catalog to page 5

IMADA CO.,LTD Load cell LMU/LU/ZD series * Contact us for details such as cable length etc. [Dimensions] LMU series LU series Cable (Approx. 3m) is attached to this connector.

Open the catalog to page 6

IMADA CO.,LTD Load cell LMU/LU/ZD series [Cautions] - Information in this document is subject to change without prior notice. - This document is product descriptions and handling precautions, and do not guarantee various characteristics or safety. - This product is designed for force measurement purpose only. - Do not copy and use this content without authorization. - Do not apply force more than its capacity or from incorrect direction to the measuring shaft. - Do not use this product in the environments including fierce temperature changes, high temperature, high humidity, near water,...

Open the catalog to page 7