IMADA CO., LTD. Built-in Torque Gauge HTGS-TFX/HTGA-TFX series Built-in Torque Gauge HTGS-TFX/HTGA-TFX series - Flange type reaction torque sensor with through holes for easy installation - Achieves high repeatability with fast sampling for peak and continuous data - Ideal for both integration and handheld use with easy-to-read OLED display - Accurate yet budget solution with indicator and sensor combined - Data management with included software and analysis with optional graphing software HTGS-TFX/HTGA-TFX series (Next Series *1) * IP (Ingress Protection) is a standard which is based on IEC Standard for solid foreign materials, electric devices for water and cabinet. *1 Next Series is a generic term for IMADA force gauges and testing devices with upgraded functions and performances. (See page 2 for details.) Features Suitable for Integration Indicator Ideal for both Handheld and Integration Indicator and Sensor Combined Ready-to-Measure - Easy to install using through-holes on both sides of the flange - Compact body 35(φ) x 28(H)mm, fits even where access is limited - Easy to install using threads (M4) on the back of the indicator - Also ideal for handheld use with grips - Load cell and indicator adjusted and calibrated as a set, ready to measure immediately after purchase - Budget solution with high accuracy for certain use - Supplied with inspection certificate (calibration certificate and traceability chart available at a charge) mounting threads Testing Examples The torque value is measured by installing it to a spot where a torsional force is applied in production or inspection equipment, such as integrating into a torque tester or a torque control system of a production line. Custom-made jigs are available to meet a wide variety of torque measurement needs.

IMADA CO., LTD. Built-in Torque Gauge HTGS-TFX/HTGA-TFX series [Main Features] High repeatability with fast sampling for peak and continuous data Comparison of destructive test results by sampling speed* sampling speed 2000Hz 100Hz Results: less variation in the left (2000Hz) High sampling rate of 2000Hz contributes to accurate results, capturing small changes and accurate peak values by following rapid changes of force. Optional graph drawing software (page 6) enables plotting of the measured data at sampling speed of 2000 times/sec. It also visualizes minute force changes, which is ideal for...

IMADA CO., LTD. Built-in Torque Gauge HTGS-TFX/HTGA-TFX series [Additional Functions of HTGA-TFX series] Angle Output Function By connecting with a customized angle meter, the angle value can be measured and displayed at the top. It is also possible to output the angle data to a PC by using the dedicated software. USB Flash Drive for Data Storage Continuous and single data (with button operation) can be saved in USB flash drive (sold separately) in CSV format. Data acquisition is possible even without PC. 1st and 2nd peak value can be measured (image of 1st/2nd peak as above). The statistics...

IMADA CO., LTD. Built-in Torque Gauge HTGS-TFX/HTGA-TFX series [Specifications] Model HTGS-TFX series HTGA-TFX series Standard model with various functions Advanced model with additional functions of HTGS series such as input/output angles and saving to USB flash drive, etc. N-m, N-cm, kgf-m, kgf-cm, lbf-in, ozf-in (*1) Display Update Sampling Rate Nickel-hydrogen battery - Operating time: 6.5 hours (2 hours full charge) (*3) Safe Overload Rating Angle Range Operating Environment Temperature: 0 to +40 degree Celsius, Humidity: 20 to 80%RH IP64 Customized display (header and footer), Peak hold...

IMADA CO., LTD. Built-in Torque Gauge HTGS-TFX/HTGA-TFX series [Included Software] Data Acquisition Software: Force Logger Main Functions - Easy importing of the measurement data - Display acquired data value statistics: maximum/minimum/average values - Data saved in csv format - Continuous data acquisition up to 10 times per second - Force-gauge function settings Operating Environment - OS: 8.1/10/11 - Hardware: CPU 1GHz or more recommended Memory 2GB or more recommended Hard disk 10GB (Data storage area) or more - Platform: .NET Framework4.8 or later [Custom-made Cables] Extended Cable Length...

IMADA CO., LTD. Built-in Torque Gauge HTGS-TFX/HTGA-TFX series [Related Products] Graphing Software: Force Recorder Series - Available in 4 types; Light, Standard, Professional, and Plus - Plots graphs of force-displacement at real time via USB connection at max. 2000Hz or 1000Hz (Plus) - Comment function for keeping a note of testing conditions such as testing speed - Overlays up to 5 graphs (Standard and Professional) or 10 graphs (Plus) - Analyzes torque-angle relationships (Professional) * Refer to each specification sheet for further information. Wireless Data Transmit System WL01 Series...

IMADA CO., LTD. Built-in Torque Gauge HTGS-TFX/HTGA-TFX series [Dimensions] Indicator Load Cell same for the other side

IMADA CO., LTD. Built-in Torque Gauge HTGS-TFX/HTGA-TFX series [Cautions] - Information in this document is subject to change without prior notice. - This document introduces product descriptions and handling precautions, and it does not guarantee the features or safety mentioned therein. - This product is designed for force measurement purpose only. - Do not copy and use this content without authorization. - Do not apply force more than its capacity or from incorrect direction to the measuring shaft. - Do not use this product in the environments including fierce temperature changes, high temperature,...