IMADA CO., LTD. Rotating Torque Gauge HTGS-RT-5N/HTGA-RT-5N Rotating Torque Gauge HTGS-RT-5N/HTGA-RT-5N - Enables measurement of Torque during continuous measuring shaft rotation - Achieves high repeatability with fast sampling for peak and continuous data - Data management with included software and analysis with optional graphing software Testing image HTGS-RT-5N/HTGA-RT-5N (Next series *1) *1 Next Series is a generic term for IMADA force gauges and testing devices with upgraded functions and performances. (See page 2 for details.) Features Enables measurement of torque during continuous rotation Indicator Ideal for both Handheld and Integration Indicator and Sensor Combined Ready-to-Measure - Supports max. rotation speed of 4000rpm. - Suitable for torque measurement with over 360-degree rotation: - e.g., rollers and gear systems. - Easy to install using threads (M4) on the back of the indicator - Load cell and indicator adjusted and calibrated as a set, ready to measure immediately after purchase - Also ideal for handheld use with grips - Supplied with inspection certificate (calibration certificate and traceability chart available at a charge) mounting threads

IMADA CO., LTD. Rotating Torque Gauge HTGS-RT-5N/HTGA-RT-5N [Main Features] High repeatability with fast sampling for peak and continuous data High sampling rate of 2000Hz contributes to accurate results, capturing small changes and accurate peak values by following rapid changes of torque. Optional graph drawing software (page 6) enables plotting of the measured data at sampling speed of 2000 times/sec. It also visualizes minute torque changes, which is ideal for analysis and evaluation. Results: less variation in the left (2000Hz) Clear OLED display with a variety of display mode The OLED display...

Rotating Torque Gauge HTGS-RT-5N/HTGA-RT-5N *1 These are the specifications for international model. Note that available units are different from Japanese domestic model. *2 The recording rate to USB flash drive is selectable among 1, 50 and 100/sec. *3 The battery is consumed faster when connected to USB flash drive or an angle meter. *4 Measurement values exceeding the capacity are not subject to calibration. The load over Overload Capacity applied may cause failure. When it occurs, stop the operation immediately and proceed with the accuracy check for measurement safety. *5 Angle meter is...

IMADA CO., LTD.Rotating Torque Gauge HTGS-RT-5N/HTGA-RT-5N[Included Software]Data Acquisition Software: Force Logger Main Functions - Easy importing of the measurement data - Display acquired data value statistics: maximum/minimum/average values - Data saved in CSV format - Continuous data acquisition up to 10 times per second - Force-gauge function settings Operating Environment - Hardware: CPU 1GHz or more recommended Memory 2GB or more recommended Hard disk 10GB (Data storage area) or more

Rotating Torque Gauge HTGS-RT-5N/HTGA-RT-5N *1 To use QSMA-400, the downloadable graphing software Quad Graph Drawer is required. Refer to the specification sheet of QSMA-400 for details. To meet diverse torque measurement needs, we propose the optimal solution according to the customer's measurement conditions and samples. Custom-made solutions are flexibly offered to serve specific needs, such as integration into equipment, or designing a jig to hold a specific sample. Please feel free to contact us.

IMADA CO., LTD. Rotating Torque Gauge HTGS-RT-5N/HTGA-RT-5N [Dimensions] Indicator Load Cell

IMADA CO., LTD. Rotating Torque Gauge HTGS-RT-5N/HTGA-RT-5N [Cautions] - Information in this document is subject to change without prior notice. - This document introduces product descriptions and handling precautions, and it does not guarantee the features or safety mentioned therein. - This product is designed for force measurement purpose only. - Do not copy and use this content without authorization. - Do not apply force more than its capacity or from incorrect direction to the measuring shaft. - Do not use this product in the environments including fierce temperature changes, high temperature,...