FORCE MEASUREMENT FORCE MEASUREMENT IMADA CO.,LTD Attachments for HTGS/HTGA series Attachments for HTGS/HTGA series - Enables to select from various attachments to suit measurement samples - Combine with HTGS/HTGA series (separately sold) for various torque measurement, such as operational torque of rotary switches and tighten torque of screws. A wide range of attachments are available to support various measurements. The same attachments can be fixed to the eHT series, SDT series, and RSH series to measure torque.

IMADA CO.,LTD Attachments for HTGS/HTGA series * Small table and pins cannot be used for torque gauges with capacity of 0.5N-m. *1 Standard Pins shown on the Small Table pictures are for the image reference. Instead, 4pcs of each pin option in the image ■ Light Weight Small Table (For 0.5/2N-m range) Light Weight Small Table Standard Pin Light Weight Small Table Notch Pin Light Weight Small Table Long Clamp Pin Suitable for measuring small samples such as plastic tubes. • Light Weight Small Table Capacity: 2N-m Allowable Sample Diameter: 97 to 50mm Weight: Approx.150g Material: Aluminum Ideal...

IMADA CO.,LTD Attachments for HTGS/HTGA series ■ Wide Table Wide Table Standard Pin Wide Table Notch Pin Wide Table Long Clamp Pin Suitable for measuring samples such as car air conditioning dials. Ideal for firmly fixing wide samples such as tablet bottles. Ideal for fixing long and wide samples such as faucets or stop cocks. • Wide Table Capacity: 5N-m Allowable Sample Diameter: φ10 to 100mm Weight: Approx.340g Material: Steel and Aluminum • Small Table Capacity: 5N-m Allowable Sample Diameter: φ10 to 100mm Weight: Approx.340g Material: Steel and Aluminum • Small Table Capacity: 5N-m Allowable...

IMADA CO.,LTD Attachments for HTGS/HTGA series Test image Pins] The set of Pins are available for replacement for purchase separately. Standard Pin * Each Pins are sold in set of 4.

IMADA CO.,LTD Attachments for HTGS/HTGA series [Dimensions] HT-ST

IMADA CO.,LTDAttachments for HTGS/HTGA series■ Pin Chuck Specifications] Model *1 HT-DC-6.5 and HT-DC-6.5SUS cannot be used for torque gauges with capacity of 0.5N-m. *2 HT-DC-13 cannot be used for torque gauges with capacity of 2N-m. *3 We recommend using the stainless-steel chuck under the circumstance making metal rust. Step1: Mount the pin chuck on the torque sensor. Step 2: Hold the sample. Turn the sleeve and Step 3: Twist the holding sample tighten the sample with the included chuck key. and measure the torque.

IMADA CO.,LTD Attachments for HTGS/HTGA series ■ Socket holder Feature Enables to measure torque by connecting a tool such as a driver bits and wrenches etc. [Specifications] Model Socket Weight * Socket holder cannot be used for torque gauges with capacity of 0.5N-m. Unit: mm Test image Step 1: Prepare a 9.5mm square socket wrench. Step 2: Mount the socket wrench on the socket holder. Step 3: Mount the Step 2 socket holder on the torque sensor. Step 4: Twist a bolt with the socket wrench and measure the torque. Torque driver Feature Measure tighten and loosen screw torque with the included screwdriver...

IMADA CO.,LTD Attachments for HTGS/HTGA series The Adapter for adjusting the Thread-size to M10. To be used with the M10 Thread-size attachments. [Specifications] Model Screw Weight [Cautions] - Information in this document is subject to change without prior notice. - This document is product descriptions and handling precautions, and do not guarantee various characteristics or safety. - This product is designed for force measurement purpose only. - Do not copy and use this content without authorization. - Some samples may not be suitable to measure with this product. IMADA CO., LTD 99 Jinnoshinden-cho...