IMADA CO.,LTD. Flat Chuck GC series Flat Chuck GC series - Allows to grip samples of various thicknesses due to the wide opening width - Replaceable Claws cater to different sample-types (GCF-1200 and GC-5000 only) - 4 models available to meet your needs Multi-Purpose model GCF-1200 GCF-1200 ▪ Swivel or non-swivel neck adjust with screwing. ▪ Different replaceable claw sold separately for various measurement requirements. Refer to Page3 for the Replaceable Claws specifications. High cost-performance model GC-1100/1200 GC-1100/1200 ▪ Non-replaceable standard V-Notch Claw ▪ Swivel Neck Type (non-fixable) ▪ High-cost performances can be expected ▪ GC-1100: Max. Sample Thickness 10mm ▪ GC-1200: Max. Sample Thickness 20mm High-capacity model GC-5000 GC-5000 ▪ High-Capacity Type for up to 5000N measurement ▪ Swivel Neck Type (non-fixable) ▪ Replaceable claws (sold separately) with different tooth types can cater to various sample ranges Refer to Page 3 for the Replaceable Claws specifications.

IMADA CO.,LTD. Flat Chuck GC series Related standards (only for GCF-1200 with Wave-Shaped claws) -ISO 1924-2:1994 [Paper and board - Determination of tensile properties – Part 2: Constant rate of elongation method] (corresponding part only) -JIS P 8113:2006 [Paper and board - Determination of tensile properties – Part 2: Constant rate of elongation method] (corresponding part only) How to use (GC-1200) Fix chuck to the measuring shaft. Open the chuck with the lever. Turn the lever in the opposite direction and grip samples. Specification Model Capacity Feature (model) High cost-performance For...

IMADA CO.,LTD. Flat Chuck GC series Replaceable claws of GCF-1200 OP-GCF-C10 V-Notch claws (supplied claws) Capacity: 1000N Suitable for unsmooth surface samples Square-Notch claws Capacity: 1000N Suitable for soft and elastic samples such as rubber Wave-Shaped claws Capacity: 1000N Suitable for thin samples such as paper Parallel claws Capacity: 1000N Suitable for gripping sample surface such as aluminum foil Rubber Bonded claws Capacity: 250N Suitable for gripping sample surfaces without scratches/damage * Each replaceable claws are sold in set of 2. V-Notch claws (supplied claws *1) Capacity:...

IMADA CO.,LTD. Flat Chuck GC series Example of Product Configuration GC-1100 Configuration 1 Code：1G2008A Simple tension (tensile) test in capacity 1000N Digital force gauge：DST-1000N Manual test stand：HV-1000N Option attachment：GC-1100 (2pcs) Example of Product Configuration GC-1200 Configuration 1 Code：1G2009A Functional and advanced tension (tensile) test in capacity up to 1000N. Digital force gauge：ZTS-1000N Motorized test stand：MX2-1000N Option attachment：GC-1200 (2pcs) Option cable：CB-528 Example of Product Configuration GC-5000 Configuration 1 Code：1G2010A Functional and advanced tension...

IMADA CO.,LTD. Flat Chuck GC series Rubber Bonded claws OP-GCF-C50

IMADA CO.,LTD. Flat Chuck GC series [Cautions] - Information in this document is subject to change without prior notice. - This document is product descriptions and handling precautions, and do not guarantee various characteristics or safety. - This product is designed for force measurement purpose only. - Do not copy and use this content without authorization. - A force gauge (sold separately) is required to use this product. - Some samples may not be suitable to measure with this product. IMADA CO., LTD. 99 Jinnoshinden-cho aza Kanowari Toyohashi Japan 441-8077 Tel: +81-(0)532-33-3288 Fax:...