Graphing software Force Recorder Next Series FORCE MEASUREMENT - PC software for recording and graphing continuous force and torque data - High-speed recording of up to 2,000 data/sec enables detailed graphing, with CSV export. - Equipped with a wide range of functions useful for evaluation and analysis, such as overlay display of multiple graphs and pass/fail judgment - Smooth and intuitive user interface that provides easy access to various functions - By presetting parameters such as the calculation range for statistical values, the settings can be automatically applied after each graph recording. Presets can be saved and recalled, significantly improving analysis efficiency (preset function) - Additional functions can be downloaded from IMADA Connected (download version only) The Force Recorder Next series is available in two versions: a download version (standalone license) and a floating license version using a License USB. (The downloadable version requires an internet connection for initial installation. If you prefer offline installation, please select the floating license version.) *1 To use the downloadable version of the Force Recorder Next series, user registration on IMADA Connected and product registration of the applicable product are required. To download the software, you must enter the redemption code printed on the dedicated download card. An Internet connection is required in this process. IMADA Connected: https://www.imada-connected.com/ 2 The floating license version is not eligible for version updates after purchase.

Graphing software Force Recorder Next Series Force-Time / Force-Displacement / Torque-Time / Torque-Angle Graphing Create precise force and torque graphs with a recording rate of up to 2,000 data/sec. The data acquisition rate can be set from 0.1 to 2,000Hz. For both the downloadable version and the floating license version, two software types are available, each supporting different graph formats: Force-Time, Torque-Time Force-Time, Force Displacement Torque-Time, Torque Angle - Manual recording - Automatic recording With a trigger function that starts and stops recording when specific conditions...

Graphing software Force Recorder Next Series Judgments [Pass/Fail Judgment Function] Pass/fail judgment possible by statistical value setting of upper and lower limits, such as maximum/average values. For specific values, upper/lower limits set for both the X-axis (time/displacement/angle) and Y-axis (force/torque). (Judgement Condition Examples) The max. force value must be within 100 to 120N and occurs 5 to 10 seconds after test starts etc. [Preset Function] (Refer to page 5 for details) This function allows pre-entering settings: pass/fail criteria and graph viewing options (e.g., interval...

Graphing software Force Recorder Next Series *1 There are restrictions on installation and simultaneous use of the product. For details, please refer to “About the Floating License Software” on page 8. *2 When performing repetitive, automatic measurements using the Trigger function, an interval of approximately 3 seconds is required between the end of one recording and the start of the next recording to prevent loss of acquired data. The interval depends on the specification and settings of the PC. *3 Version updates after purchase are not supported. Please purchase the software again to update...

IMADA CO., LTD. Graphing software Force Recorder Next Series [Screen Descriptions] Main Tool Bar Open and close files, configure device settings, set user preferences etc. area, and check the software version, among other functions (Pre-recording settings) Recording Settings Window Settings before the measurement allow conditions to be automatically reflected for subsequent measurements. The settings remain while the software is running. The Record / Triggers / Graph and other items have preset functions available, helpful in re-testing under the same condition later with the saved environment...

IMADA CO., LTD. Graphing software Force Recorder Next Series Graph Area The area where the recorded graphs and also the re-opened graphs from the files are displayed. Use the Tool Bar icons to Display Reset / Section Data Settings, and the manual insertions of the annotations, etc. (Graph Viewing Window) Monitoring Window Statistics Window Feature examples: Adding Graphs / Insertion of Guidelines and Annotations to the Displayed Data / Graph Inversion / Data Save & Printing The following information of the currently viewed graphs are displayed: The Monitoring Window and the Statistics Windows...

Graphing software Force Recorder Next Series *1 For Force-Displacement graph, connection with a linear scale is required. *2 For Torque-Angle graph, connection with an angle meter is required. User support site “IMADA Connected” For the downloadable version of Force Recorder Next series, additional functions are available for download from the user support site “IMADA Connected”. For details, please refer to the documents “Additional Functions and Various Services for Next Series” and “Additional functions for Force Recorder Next Series”.

IMADA CO., LTD. Graphing software Force Recorder Next Series [About the Downloadable Version Software] Force Recorder Next Standard / Force Recorder Next Professional The downloadable version of Force Recorder Next series is software that can be downloaded from IMADA Connected. A dedicated download card with a redemption code is provided when the software is purchased. Installation on multiple PCs is not supported; one dedicated download card is required for each PC. The software supports additional function downloads and version updates through IMADA Connected. Download Card (Force Recorder...

Graphing software Force Recorder Next Series - Information in this document is subject to change without prior notice. - This document is product descriptions and handling precautions, and do not guarantee various characteristics or safety. - This product is designed for force measurement purpose only. - Do not copy and use this content without authorization. - A force gauge (sold separately) is required to use this product. - This product is protected by Universal Copyright Convention and Japanese Copyright Act. - Returns are not acceptable. Check the specification, working conditions and operating...