Force-displacement measuring unit FSA series The Force-Displacement Measurement Unit FSA series comprises all the tools necessary for conducting force-displacement measurements, including a digital force gauge, a test stand with a linear scale installed, and graphing software. A highspeed sampling rate of 2000 Hz enables accurate force measurements, resulting in highly reproducible force-displacement graphs. By combining it with the included standard or optional attachments (sold separately), various force measurements, such as tensile force, compressive force, and peel force, can be achieved. The detachable force gauge is suitable for various handheld measurements and is particularly advantageous for calibration and repair processes, as it can be managed independently.

Force-displacement measuring unit FSA series Force value when the specified displacement is compressed/pulled (Displacement when compressed/pulled with the specified force value) Data obtained for the amount of push-in, pulling distance, and the force value. T visualization of the transition of force values and the retrieval of force values at averages and peak values are automatically detected and displayed. Comment The force rapidly rises against the displacement. For example, in click sensation test of tactile switch, hysteresis and returning zero is obvious from the graph of a reciprocating...

IMADA CO., LTD. Force-displacement measuring unit FSA series [Configuration] Accessories and Descriptions 1. High Functionality Model Digital Force Gauge ZTA series Measuring instrument with an integrated load cell. In addition to force values, it displays displacement with a connection to a linear scale. The unit enables handling wide force ranges by exchanging force gauges appropriately. 2.Test Stand with pre-installed Linear Scale The test stand conduct measurement with the up/down movements of the mounted force gauge. The linear scale is pre-installed and connected to a force gauge for force-displacement...

IMADA CO., LTD. Force-displacement measuring unit FSA series Vertical Type Vertical Type (Precise/Multiple functions) Horizontal Type MX2 Series with the FSA Series High-Cost Performance Model: Standard vertical type model test stand. Digital settings for speed/number of repetitions/ load keep time, etc. EMX series with the FSA series The high-end model in the MX2 series. Equipped with digital displacement settings/contact detection functions. Higher rigidity and an even wider range of adjustable speeds. MH2 Series with the FSA Series High-Cost Performance Model: Standard horizontal type model...

Force-displacement measuring unit FSA series *1 Force Recorder Next Professional-FLT is a floating license version of the software that can be installed in an offline environment using a USB flash drive. Its specifications differ from those of the download version, such as the inability to install additional functions. For details, please refer to the specifications of the Force Recorder Next series.

Force-displacement measuring unit FSA series *4 The maximum sample height varies depending on the mounting position and direction of the force gauge mounting plate. Refer to the specification sheet of each test stand for details. *5 Downloadable operation setup software included. Refer to the specification sheet of the included test stands for details. *6 Extended Column option: EXT model enables measurement of the extended height sample; the stroke distance remains unchanged. *7 The speed change available as follows. (-V45=1.5 to 45 mm/min, -V75=2.5 to 75 mm/min, -V90=3 to 90 mm/min, V150=5...

IMADA CO., LTD.Force-displacement measuring unit FSA series[Individual Model Specifications Details: Models with horizontal motorized test stand / manual test stand] The capacity of the entire unit is limited by the capacity of the selected ZTA model. *2 Refer to the individual specification sheet for test stands for details *3 Maximum sample height means the following distance when the test stand head is at the highest position. *1 Refer to the digital force gauge Specification sheet for the ZTA series for details.

Force-displacement measuring unit FSA series * For details on the RS232C printer and connection cable, please refer to the individual specification sheets. *1 FSA-MSL is not eligible for this option. The test stand for the model, MSL-50N requires cable customization, to add RS232C split cable required. Please contact us for details. *2 This product can be sold to customers in Japan and EU markets only. Please contact us if you would like to purchase the product in other regions. Data output from ZTA to RS232C printer is supported only for products with firmware Ver. 3.10 or later; For Next Series...