Advanced Type Vertical Motorized Test Stand EMX2 series Advanced Type Vertical Motorized Test Stand - Capable of applying large forces that are difficult to achieve manually, with high stability - Enable highly reproducible tests with uniform test conditions in speed/force direction - Able to perform tension /compression tests set at travel distances in 0.1mm increments - Force gauge interlinking functions equipped for contact / break detection and force control - Supports variety of testing conditions with a wide speed range settings from 0.5 to 600 mm/min - Dedicated downloadable software included for setting/saving/loading test conditions EMX2 series for Adva nced Force Measurement EMX2 series is an advanced type of motorized test stand with digital travel distance setting (in 0.1mm increments), contact / break detection, and operation control by force value (*1). EMX2 series boasts one of the highest rigidities of IMADA's all models, minimizing deflection under load to achieve higher precision in force-displacement measurement. Accommodates a wide range of test speeds from 0.5 to 600 mm/min and enables repetitive durability testing with a set number of cycles under identical conditions. EMX2 series features a condition memory function up to 10 settings and downloadable software included for setting test conditions from PC (*2). Setting and switching test conditions with simple operability. *1 Force gauge connection required for force gauge interlinking function with a dedicated cable. Refer to Pg. 5 for details. *2 Software CS Test Preset Builder download version included. Refer to Pg. 6 for details.

Imada Co., Ltd. Advanced Type Vertical Motorized Test Stand EMX2 series [Product Configuration Example] [Optional Cable] * Dedicated Cable for connecting the motorized test stand and the force gauge. Connecting enables various Interlinking functions. [Upper/Lower Limit Knobs] [Shift Point Knob] The upper and lower knobs to limit the head movement, and the set point knob controls the head speed. (Refer to Pg.3 Function Overview) [Head] [Force Gauge] * Force-measuring instruments for compression/tension force measurements. Mounted to the test stand head with included bolts. The moves up and down...

Advanced Type Vertical Motorized Test Stand EMX2 series [Auto Test Mode] Auto Test Mode settings enable automatic movement of the head within the set stroke limits / at specified travel distance, operation controls by force value (with specified force values: stop, reverse, hold, etc.) *1, and repeat settings, which can be configured with the required number of repeats and stops. ■ Speed Settings for Auto Test Mode The speed settings are available within the range of 0.5 to 600 mm/min for the measurement Forward, Measuring, and Return. Refer to the [Product Specifications] for details on setting...

Advanced Type Vertical Motorized Test Stand EMX2 series *1 When applying force to highly elastic samples such as springs, the speed may decrease by a few percent. *2 The speed unit: in/min is also available only in international model. (0.02 to 23.60 in/min [Setting in 0.01 in/min increments]) *3 This value is the distance between the test stand table and the tip of force gauge measuring shaft when the head is in the uppermost position. (When up to 1000N model of ZTS/ZTA series is mounted.) The maximum sample height of EMX2-1000N varies depending on the mounting position and direction of the...

Imada Co., Ltd.Advanced Type Vertical Motorized Test Stand EMX2 series [Mountable Force Gauges - Load cells not listed cannot be mounted on any of our test stands. - Ensure to use within the capacity of force gauge and test stand regardless of the mountable models. *1 Mounting block (sold separately) is required to mount DPUH series (1000N to 5000N) to EMX2-1000N.

Advanced Type Vertical Motorized Test Stand EMX2 series The software allows the Auto Test Mode testing condition settings from PC or Tablet devices. (*1, *2)

Advanced Type Vertical Motorized Test Stand EMX2 series [EMX2-500N External View Description] Front View: the included chuck mounting plate GF-1 attached Side View / Top View: the included GF-1 unattached. M8 in the Top View: the screw hole position for the GF-1 on the Test Stand Table. M6 in the Front View: the attachment mounting screw of the included GF-1 (EMX2-500N-L with Fall prevention attachments)

Advanced Type Vertical Motorized Test Stand EMX2 series [EMX2-1000N External View Description] M8 in the Top View: the screw hole position for the GF-2 on the Test Stand Table. M6/M10 in the Front View: the attachment mounting screw of the included GF-2 (EMX2-1000N-L with Fall prevention attachments) *1 Mounting block (optional) is required when mounting DPUH-1000N to 5000N. *2 Dimensions at the lowest position and highest position, including changes to the mounting direction of the force gauge mounting plate in addition to the screw holes on the head used.

Imada Co., Ltd. Advanced Type Vertical Motorized Test Stand EMX2 series [Cautions] - Information in this document is subject to change without prior notice. - This document is product descriptions and handling precautions, and do not guarantee various characteristics or safety. - This product is designed for force measurement purpose only. - Do not copy and use this content without authorization. - A force gauge (sold separately) is required to use this product. - Do not use this product in the environments including fierce temperature changes, high temperature, high humidity, near water, dusty...