Advanced Type Vertical Motorized Test Stand EMX series - High end model achieving greater precision as well as high usability - Wide speed range, 0.5 to 600mm/min, allowing various test conditions - Able to press and pull sample at desired distance from contact point (Length limit/CONTACT DETECTION) Improving precision of measurement with EMX series EMX feature rugged design and smooth motion, achieving precise measurement. With minimized influence of deformation, it is not only suitable for force measurement, but also a perfect solution for force-displacement measurement. Combine it with a force gauge and dedicated software, to draw graphs of force vs time or force vs. displacement at high sampling rate (2000Hz). *1 Requires certain models of force gauge and optional cable. *2 This function is not able to be used together with CONTACT DETECTION. It equips useful functions to handle a variety of testing, such as wide speed range (0.5 to 600mm/min), setting of digital travel distance by 0.1mm, CONTACT DETECTION, repeating number of testing, pausing time, and operation pattern storing functions. Furthermore, the equipped I/O connector allows communications with various external devices, which can be used to improve efficiency or safety in testing by using inputs such as start and interlock.

IMADA CO., LTD. Advanced Type Vertical Motorized Test Stand EMX series [Application Example and Configurations] [Stroke Limit] [Speed Shift Point] Set limits of stroke easily with upper and lower knobs. Middle knob adjusts the speed shift point. [Optional Cable] Connects force gauge and test stand to activate a variety of control functions. [Head] Operates upward and downward with mounted force gauge. [Force Gauge] Measures compression, tensile, peel strength, etc. Mountable to test stand with screws. [Table] Attachments or testing samples can be mounted on the table. Dimension: W200 x D100 mm...

Advanced Type Vertical Motorized Test Stand EMX series This option provides extended stroke. Useful when testing stretching samples or testing for long distance. This option allows a linear scale unit to be installed on the test stand column for measuring head displacement. *A compatible force gauge with displacement I/O, such as the ZTA series, and an optional cable are required. FORCE MEASUREMENT

IMADA CO., LTD.Advanced Type Vertical Motorized Test Stand EMX series[Specifications] Model *1 When applying force to highly elastic samples such as springs, the speed may decrease by a few percent. *2 This value is the distance between the test stand table and the tip of force gauge measuring shaft when the head is in the uppermost position. (When up to 1000N model of ZTS/ZTA series is mounted.) The maximum sample height of EMX-1000N varies depending on the mounting position and direction of the force gauge mounting plate. Refer to [Dimensions] for details. *3 Due to the mechanical characteristics...

Advanced Type Vertical Motorized Test Stand EMX series It builds a linear scale into a test stand to output travel distance of a force gauge and allows to utilize it for analysis of force-displacement relations. * Requires to mount the unit to EMX series (firmware ver. 2.0 or later) by yourself. Cable CB-718 (soled separately) is required. * This option is available only for firmware Ver.2.0 or later. If your test stand's firmware is earlier than ver.2.0, it has to be shipped to our factory to activate this option. Additionally, Cable CB-728 (sold separately) is required. Contact us for more...

IMADA CO., LTD.Advanced Type Vertical Motorized Test Stand EMX series [Examples of Customized Solutions] [Dimensions] (EMX-500N-L with Anti-tip fixture) * “M6” on the front view and the side view are for attachment installation and “M8” on the top view indicates the position of holes for the screw to fix the grip mounting adaptor to the stand.

Advanced Type Vertical Motorized Test Stand EMX series * “M6” or “M10 (for 1000N or higher models)” on the front view and the side view are for attachment installation and “M8” on the top view indicates the position of holes for the screw to fix the grip mounting adaptor to the stand. *1 Mounting block (optional) is required when mounting DPUH-1000N to 5000N. *2 Dimensions at the lowest position and highest position, including changes to the mounting direction of the force gauge mounting plate in addition to the screw holes on the head used. - The contents may be changed without prior notice....

IMADA CO., LTD. Advanced Type Vertical Motorized Test Stand EMX series 99 Jinnoshinden-cho aza Kanowari Toyohashi Japan 441-8077 Tel: +81-(0)532-33-3288 Fax: +81-(0)532-33-3866 E-mail: [email protected] Website: https://www.forcegauge.net/en/ Visit our website for more information on wide product specifications, measurement applications and videos.