IMADA. CO.,LTD Torque Tool Tester I-8/I-80 Torque Tool Tester I-8/I-80 Measure torque (rotating force) for motor screwdriver and torque driver. It is suitable for daily torque maintenance with simple operations. The data output (serial communication) is possible. (Right) I-80 Product Standard Set It enables to save peak value, output to PC (the optional PC is required) and others. Step1. Set adapter. Step 2. Turn on the power. Step 3. Operate the driver tool. (*) Step 4. The measurement finishes. *At the Step 3, the user inserts the using screw in the driver adapter.

FORCE MEASUREMENT FORCE MEASUREMENT IMADA. CO.,LTD Torque Tool Tester I-8/I-80 * In the bit joint part, the user inserts their using screw. * The OW series adapters cannot be used for manual torque drivers. For manual torque drivers, please use a socket adaptor (SQ9.5). Socket holder is not included in I-8/I-80.

FORCE MEASUREMENT FORCE MEASUREMENT IMADA. CO.,LTD Torque Tool Tester I-8/I-80 Output data is into ASCII by USB cable (Type B). Specification of Data output Data Contents CAN : Cancel * : When the measuring value output The data number is displayed at memory data output (e.g. The data No.1 is displayed “001”). “Space” is output at “Clear”. : When the average value output “ N “...Data number, ”MAX”...Maximum value, ”MIN”...Minimum value, ” m “... Average value (“ N “ and “ m “ are displayed in the center.) 50 : Select double-width printing Measuring value: Including decimal point. e.g)1 0.0 0...

IMADA. CO.,LTD Torque Tool Tester I-8/I-80 [Cautions] - Information in this document is subject to change without prior notice. - This document is product descriptions and handling precautions, and do not guarantee various characteristics or safety. - This product is designed for force measurement purpose only. - Do not copy and use this content without authorization. - Do not use this product in the environments including fierce temperature changes, high temperature, high humidity, near water, dusty place. - Please note that the capacity is dependent on the displayed unit. Please contact us...