Load cell for automatic doors DM-2000N, Load cell for doors and windows SKM-1000N - Designed to measure closing force of door or windows - Simply place the sensor between door/window and its frame to perform the test - Complies with JIS standards (only DM-2000N) Load cell for automatic doors Load cell for doors and windows Measuring image The flexible arm can fix the sensor's direction. You can easily fix sensor’s position and direction due to its flexible arm. * An amplifier (indicator) is required to read values. Refer to “Available amplifiers (indicators)” on page 3 for details. 1 We also offer model including the extension shaft and other options.

Load cell for automatic doors DM-2000N, Load cell for doors and windows SKM-1000N *1 The load cell cannot be separated from the indicator, therefore, no specification is stated as single sensor. Refer to separated sensor model on page 3 for further information. *2 IP65 is only approved for the load cell itself. The amplifier (indicator) and the connector parts are not secured. *3 Refer to specification of [Options Available for Load cell Cable] to change cable length or so. * See page 3 for the accuracy of combinations with the amplifier (indicator) under [Models of sensors combined with indicators...

IMADA CO., LTDLoad cell for automatic doors DM-2000N, Load cell for doors and windows SKM-1000N [Available Amplifiers (Indicators)] *1 Total accuracy when combined with the eZ-Connect series amplifier. e.g. Total accuracy of eCLFX and eZT +/-1.2%F.S. or less (Load cell: +/-1.0%F.S. or less + Amplifier: +/-0.2%F.S. or less) * Please refer to the accuracy of the sensor of eZ-Connect in the Specifications table.

IMADA CO., LTDLoad cell for automatic doors DM-2000N, Load cell for doors and windows SKM-1000N [Sensor Model] * Add the code to the end of model. For example, when ordering DM-2000N with 5 pin, the product model is “DM-2000N-5P”. Load cell for Two-wheeler Handbrakes PK1-500N Optional Handle for A Fire Door Closing Measurement HDC-1 Load cell for Vehicle Foot Pedals PK2-1500N HDC-1 is optional handle for a fire door closing measurement. It achieves stable support for safe and repeatable testing by pushing the device against a door. Load cell PK1-500N is for force testing of two-wheeler handbrakes...

Load cell for automatic doors DM-2000N, Load cell for doors and windows SKM-1000N Extension Shaft * You can select the suitable model according to the distance specified in JIS A4722 * This handle is mounted on the middle part of extension shaft, enabling you to hold the sensor easily.

IMADA CO., LTD Load cell for automatic doors DM-2000N, Load cell for doors and windows SKM-1000N The spring seat made of harden aluminum (500N/mm) Bottom: Harden aluminum Fixer of extension shaft * eDM series connector dimension is different. Non-slip rubber Non-slip rubber [Cautions] - Information in this document is subject to change without prior notice. - This document is product descriptions and handling precautions, and do not guarantee various characteristics or safety. - This product is designed for force measurement purpose only. - Do not copy and use this content without authorization....

IMADA CO., LTD Load cell for automatic doors DM-2000N, Load cell for doors and windows SKM-1000N