*mydirectindustry

Catalogs
IMADA
CP-150N

CP-150N

Product catalog summary

Overview: The Pin Grip CP-150N by IMADA CO., LTD is a lightweight and compact tool designed for gripping wire-shaped samples up to a diameter of 3.2mm. It is suitable for tensile or compression tests in limited spaces.

Installation Procedure: To install test samples, remove the cover, insert the desired collet into the body, place the cover back, and insert the test sample. Turn the cover to secure the sample.

Specifications:

Model: CP-150N
Capacity: 150N
Aperture Width: Diameter 0 - 3.2mm
Weight: Approx. 22g (with collet)
Mounting Screw: M6
Accessories: Includes 2 collets with varying aperture widths

Note: The weight of the attachment affects the force gauge capacity.

Product Configurations:

Configuration 1 (Code: 1C2002A): Simple tensile test up to 150N with DST-200N digital force gauge and MX-500N motorized test stand.
Configuration 2 (Code: 1C2002B): High functionality tensile test up to 150N with ZTS-200N digital force gauge, MX2-500N motorized test stand, and additional accessories.

The choice of configuration depends on sample characteristics and measurement conditions.

Compatible Force Gauges: Compatible with DST/DSV, ZTS/ZTA, and FB/PS/PSM series force gauges. Selection should match the mounting screws of the attachment.

Related Products: Includes Jacob’s chuck, wire wrapping grip, and fine point chuck, each designed for specific sample types and testing methods.

Cautions:

Specifications may change without notice.
A separate force gauge is required.
Designed exclusively for force testing.
Not all samples may be suitable for this product.
Unauthorized copying of content is prohibited.

Contact Information: IMADA CO., LTD, Toyohashi, Japan. Tel: +81-(0)532-33-3288, Email: [email protected], Website: https://www.forcegauge.net/en/

Catalog excerpts

IMADA CO.,LTD. Pin Grip CP-150N Pin Grip CP-150N It is designed to grip wire-shaped samples up to φ3.2mm. It is lightweight & small, fitting for tensile or compression test of lower range in a limited space. Test Image Collet (Tensile test of press-fit components) How to Install Test Samples Remove Cover, and insert a desired Collet into Body. Put on the Cover, and insert a test sample into it. Turn the Cover to fix the test sample.

Open the catalog to page 1

IMADA CO.,LTD. Pin Grip CP-150N Specifications CP-150N 150N Diameter 0 - 3.2mm See the “Dimensions” Approx. 22g (when a collet is combined) M6 Model Capacity Aperture width Size Weight *1 Mounting screw * If your test sample is soft, a gripped part could be broken. *1 Weight of the attachment is also applied as a load on the force gauge. Consider it when selecting the capacity of a force gauge. Example of Product Configuration CP-150 Configuration 1 Simple tensile test up to 150N Digital force gauge: DST-200N Motorized test stand: MX-500N Optional attachment：CP-150N Optional attachment：GT-30(Vice...

Open the catalog to page 2

IMADA CO.,LTD. Pin Grip CP-150N Related Products Jacob’s chuck GC-5/GC-15 - Designed to grip cylindricalshaped samples - For both tension & compression tests Wire wrapping grip WG-250N/WG-1000N/WG5000N - Designed for tensile test of strings, wire and the like. - Due to wrapping method, samples get harder to be broken. Fine point chuck FP-50/FP-51 - Designed to grip fine strings or threads even at narrow space [Cautions] - Specifications are subject to change without prior notice. - A force gauge (sold separately) is required to use this product. - This product is designed for force testing only....

Open the catalog to page 3

CP-150N

CP-150N

Catalog excerpts

All IMADA catalogs and technical brochures

Archived catalogs