IMADA CO., LTD. Washer Type Compression Load Cell CHX series Washer Type Compression Load Cell CHX series - Washer (through hole) type sensor, suitable for press-fit force measurement - Small body, ideal for measurements in limited space - 5 selectable amplifiers (indicators) to fit for purpose - Graphing software (separately sold) available for analysis of results through hole CHX series * IP (Ingress Protection) is a standard which is based on IEC Standard for solid foreign materials, electric devices for water and cabinet. * eZ-Connect series load cells are interchangeable and can be connected to one amplifier without adjustment, therefore suitable for measurement of different types of force (e.g. tension and torque) or ranges (e.g. small force and high capacity). Push in a rod-shaped sample (e.g. a shaft) through a part (e.g. a gear) to measure the press-fit force during insertion. load cell Testing Examples Press-fit force measurement, rod-shaped sample measurement, clamping force measurement, etc.

IMADA CO., LTD.Washer Type Compression Load Cell CHX series Specifications *1 It is the accuracy of the sensor only. Refer to page 3 for the accuracy of combinations with the amplifier (indicator) under [Models of Sensors Combined with Indicators (Separated sensor models)] and [Models of eZ-Connect Series (Sensor Interchangeable Model)]. *2 IP is only approved for the sensor part. The amplifier (indicator), the connector parts, and cable are not secured. *3 Refer to specification of [Options Available for Load cell Cable] to change cable length or so. * An amplifier (indicator) is required to...

IMADA CO., LTD.Washer Type Compression Load Cell CHX series [Available Amplifiers (Indicators)] * When ordering load cell only, select the connector type and add the code to the end of the load cell model; for example, the product model for CHX-500N with 5 pin is “CHX-500N-5P”.

Washer Type Compression Load Cell CHX series - Graphing Software Force Recorder Series - Available in 4 types; Light, Standard, Professional, and Plus - Plots graphs of force-displacement at real time via USB connection at - Comment function for keeping a note of testing conditions such as testing speed - Overlays up to 5 graphs (Standard and Professional) or 10 graphs - Analyzes torque-angle relationships (Professional) * Refer to each specification sheet for further information.

IMADA CO., LTD. Washer Type Compression Load Cell CHX series Type Analog cable Analog cable (For -AN option) RS232C cable Open end connection cable Terminal Block Cable Purpose of use To connect to a multi meter, oscilloscope To connect to a multi meter, oscilloscope To connect to a PC or your own system Output cable for loose wire 37 pin (Useful for connecting your own connector) To connect to an external equipment such as PLC or to such and linear scale (*1) *1 The linear scale connection is limited to models equipped with the displacement output function (ZTA series, eZT, FA Plus2, eFA Plus2)....

FORCE MEASUREMENT Washer Type Compression Load Cell CHX series - Information in this document is subject to change without prior notice. - This document introduces product descriptions and handling precautions, and it does not guarantee the features or safety mentioned therein. - This product is designed for force measurement purpose only. - Do not copy and use this content without authorization. - Do not apply force more than its capacity or from incorrect direction to the measuring shaft. - Do not use this product in the environments including fierce temperature changes, high temperature, high...