IMADA CO., LTD. High Capacity Wire Crimp Test Fixture CW-5000N/CH-5000N High Capacity Wire Crimp Test Fixture CW-5000N/CH-5000N - Designed for wire crimp testing up to 5000N - Suitable for ring terminals with inner diameter of 4mm to 12mm - Reduces slippage and breakage of the covering due to shear stress Testing Image - JIS C2805:2010 [Crimp-type terminal lugs for copper conductors] (corresponding part only)

FORCE MEASUREMENT FORCE MEASUREMENT IMADA CO., LTD. High Capacity Wire Crimp Test Fixture CW-5000N/CH-5000N Attach the terminal to the fixing plate of CH-5000N with the screw. Tighten the fixing bolt of CW-5000N to clamp the wire between the blocks. *1 Weight of the attachment is also applied as a load on the force gauge. Consider it when selecting the capacity of a force gauge. * Some hard samples made of hardened material or samples with slippery surface are not suitable to clamp with this product. * Some special wires such as stranded wires may not be suitable to clamp with this product. Example...

IMADA CO., LTD. High Capacity Wire Crimp Test Fixture CW-5000N/CH-5000N Related Products Spare Fixing Plates CH5000-D10/CH-5000-D12 Allows for efficient testing by preparing the next testing sample while conducting a test. Knurled Cam Grip GP-30 Ideal for clamping wires and cables. Rotary Wire Terminal Fixture FW-12/PW-4 Designed for easy sample setting by hooking through the slit or pin for crimp tests. Automatic Crimp Tester ACT-1000N Test Stand for Crimp Test LH-500N Automatic crimp tester with the capacity of 1000N, provided with software for PC data management and setting of testing conditions....

IMADA CO., LTD. High Capacity Wire Crimp Test Fixture CW-5000N/CH-5000N [Cautions] - Information in this document is subject to change without prior notice. - This document is product descriptions and handling precautions, and do not guarantee various characteristics or safety. - This product is designed for force measurement purpose only. - Do not copy and use this content without authorization. - A force gauge (sold separately) is required to use this product. - Some samples may not be suitable to measure with this product. IMADA CO., LTD 99 Jinnoshinden-cho aza Kanowari Toyohashi Aichi Japan...