IMADA CO., LTD. Cantilever Bending Test Jig CBJ-200N Cantilever Bending Test Jig CBJ-200N - Ideal for cantilever bending tests of samples such as cutlery, cotton swabs, toothbrushes, needles, and more - Easy to adjust the pressing point of sample according to the scale - Easy to set samples under the same conditions by the adjustment plate, increasing work efficiency - Suitable for various samples up to 25mm thickness CBJ-200N Testing Image (Cantilever bending test of cutlery) How to use Align the center position for pressing Adjust the pressing point of sample

Cantilever Bending Test Jig CBJ-200N *For accurate measurement, please make sure the sample bending angle is 45 degrees or less in the test. *Use a force gauge range of 20N or higher when the supplied extension shaft is used. *1 Use the supplied extension shaft when the distance from fulcrum to load applying point is lower than 40mm. *2 Weight of the attachment is also applied as a load on the force gauge. Consider it when selecting the capacity of a force gauge. Example 1 Code: 1C2009A It is for simple cantilever bending test up to 200N. Digital Force Gauge: DST-200N Motorized Test Stand: MX-500N...

FORCE MEASUREMENT FORCE MEASUREMENT Cantilever Bending Test Jig CBJ-200N * Refer to the specification of each product for details. *1 -CN option and safety setting of MX2 series are required to activate interlock function.

IMADA CO., LTD. Cantilever Bending Test Jig CBJ-200N Extension shaft [Cautions] - Information in this document is subject to change without prior notice. - This document is product descriptions and handling precautions, and do not guarantee various characteristics or safety. - This product is designed for force measurement purpose only. - Do not copy and use this content without authorization. - A force gauge (sold separately) is required to use this product. - Some samples may not be suitable to measure with this product. IMADA CO., LTD. 99, Innocence-Cho, Aza, Kanowari, Toyohashi, Aichi 441-8077,...