IMADA.CO.,LTD. 3-Point Bending Test Jig, BT series 3-Point Bending Test Fixture BT-500N / 5000N / 5000N-CB ・3-Point Bend attachment for flexural, rigid, semi-rigid, snapping properties: for ceramics, glasses, composites, plastics, metals, or any sheet and round bar form materials. ・Interchangeable Loading Pins and adjustable bending span caters for wider range of measurement requirements. ・Partially compliant with ISO and JIS standard testing. Test Image with BT-5000N Related Standard References -IEC 60672-2 (1999) Ceramic and glass insulating materials - Part 2: Methods of test. (Corresponding part only) (Japanese Standards: JIS C 2141: 1992) (Corresponding part only) -ISO 14704: 2000 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for flexural strength of monolithic ceramics at room temperature. (Corresponding part only) (Japanese Standards: JIS R 1601: 2008) (Corresponding part only) -JIS R 1602: 1995 [Testing methods for elastic modulus of fine ceramics] (Corresponding part only) -ISO/FDIS 14215: 1998 Fiber-reinforced plastic composites - Determination of flexural properties (Corresponding part only) (Japanese Standards: JIS K 7017: 1999) (Corresponding part only) -JIS K 7074: 1988 Testing methods for flexural properties of carbon fiber reinforced plastics (Corresponding part only) -JIS K 7088: 1996 Testing methods for flexural creep of carbon fiber reinforced plastics (Corresponding part only) -JIS H 7406: 1993 Test method for flexural properties of fiber reinforced metals (Corresponding part only)

IMADA.CO.,LTD. 3-Point Bending Test Jig, BT series How used Example Adjust bending span of the Supporting Anvils Apply force from above Specifications Model Basic Milled Edge Anvil Limited Function Upper Anvil Radius Supporting Anvil Radius Max. Sample Widths Standard types: Interchangeable Loading Pin options ※1 Fulcrum distance Refer to the details on Pages 5/6-6/6 Upper Anvil mounting screws Upper-loading Anvil: 100g Supporting Anvils: 2100g Upper-loading Anvil: 130g Supporting Anvils: 2300g Upper-loading Anvil: 150g Supporting Anvils: 2300g * The Loading Pin is a rod shaft that fixed with...

IMADA.CO.,LTD. 3-Point Bending Test Jig, BT series *Example: Product configuration Code: 1B2001A For basic measurements up to 500N Digital force gauge: DST-500N Motorized test stand: MX-500N Optional attachment: BT-500N *Example: Product configuration Code: 1B2002A Complies with the corresponding part of ISO 14704: 2000 and JIS R 1601: 2008 Digital force gauge: ZTS-5000N Motorized test stand: MX2-5000N Optional attachment: BT-5000N Optional cable: CB-528 Optional software: Force Recorder Standard Interlocking Shield Option: OP-MX250-IC *Example: Product configuration Code: 1B2003A Complies with...

IMADA.CO.,LTD. 3-Point Bending Test Jig, BT series Possible range of custom made Model R of Interchangeable Pin ※1 Material of interchangeable Pin Max. width of Upper Anvil Max. width of Supporting Anvil Loading Pin: R3.0~5.0 Supporting Pins: R3.0~5.0 Loading Pin: R3.0~5.0 Supporting Pins: R1.5~3.0 ※1 Available fulcrum radius, caters each with R0.5 units. Related Products Compression Pin PG-2/3/4/5 Ideal for compression and penetration testing for small samples up to 200N. Compression Plate Jig A-40/60, S-40/60 For top-load and crush resistance testing up to 500N, available in Aluminum (A) /...

IMADA.CO.,LTD. 3-Point Bending Test Jig, BT series

IMADA.CO.,LTD. 3-Point Bending Test Jig, BT series [Cautions] - Information in this document is subject to change without prior notice. - This document is product descriptions and handling precautions, and do not guarantee various characteristics or safety. - This product is designed for force measurement purpose only. - Do not copy and use this content without authorization. - A force gauge and the Test-stand (both sold separately) are required to use this product. - Some samples may not be suitable to measure with this product. IMADA CO., LTD. 99, Jinnoshinden-cho, Aza, Kanowari, Toyohashi...