FORCE MEASUREMENT FORCE MEASUREMENT Automatic Crimp Tester ACT-1000N - Improves test efficiency with one-button operation, providing smooth flow from testing to data saving including OK/NG (pass/fail) judgement- 2 modes selectable: BREAK mode and KEEP mode - Capable of saving up to 26 test patterns, immediately recallable to suit various samples - Complies with the corresponding part of UL and JIS standard [Evolution to the Next Series] Next Series is a generic term for IMADA measurement devices with upgraded functions and performances with the essential modifications. The devices enable to install additional functions from the user support site, IMADA-Connected. On the website, related data such as instruction manuals can also be downloaded. Next Series: ACT-1000N Firmware Ver.2.0 or later. -Increased measurement stability achieved from further noise reduction to the measurement circuit. - Measurement device program (firmware) online updates available. - Additional functions and instruction manuals downloadable to increase the measurement conveniences. Internal analog wave comparison Yellow: Next series/Green: Old Model

FORCE MEASUREMENT FORCE MEASUREMENT Automatic Crimp Tester ACT-1000N -JIS C 2805: 2010 [Crimp-type terminal lugs for copper conductors] (corresponding part only) -JIS C 5402-16-4: 2012 [Connectors for electronic equipment-Tests and measurements-Part 16-4: Mechanical tests on contacts and terminations-Test 16d: Tensile strength (crimped connections)] (corresponding part only) -UL 486A-486B: 2013 [Standard for Safety for Wire Connectors-9.3.4 Pullout test] (corresponding part only) Features Perfect solution for automatic crimp testing Simple sample setting by one hand Returns automatically OK/NG...

FORCE MEASUREMENT Automatic Crimp Tester ACT-1000N User-friendly Structure *1 This is the specifications for International model. Please note the specification is different for Japanese domestic mode. *2 Please contact us when you need to measure smaller size samples. *3 Overload Stop function does not guarantee complete prevention of failure/damage due to overload.

Automatic Crimp Tester ACT-1000N Supplied Software ACT Logger Next Edit Test Condition Output Test Result The data (Peak Force, OK/NG judgement, Date&Time, Test condition) and staticstics can be saved in PC. CSV output and print of result are also possible. Collectively edit the test condition up to 26 patterns (From A to Z) in PC. The edited conditions are available to be imported to ACT-1000N. * ACT Logger Next is downloadable software. To use the software, user registration on IMADA Connected and product registration of an ACT Series product (Version 2.00 or later) are required. An internet...

Automatic Crimp Tester ACT-1000N *1 Refer to [Dimension] on page 7 for detailed sizes. *2 The image is ATC-T-03L. Fix the main body of ACT-T-03L with the snap pin and fixing pin. Insert the measuring shaft of ACT-1000N into the main body of ACT-T-03L. Set the sample to the fixing plate of ACT-T-03L and attach it to its main body. Grip the wire part of the sample with the wire fixture and measure the terminal strength by pulling the wire.

Automatic Crimp Tester ACT-1000N Wire Terminal Jig (Supplied) Please contact us when you measure smaller size samples.

FORCE MEASUREMENT FORCE MEASUREMENT Automatic Crimp Tester ACT-1000N Jig for round terminals: ACT-T-01 (Option) Jig for ferrule terminal: ACT-T-03S/L (Option) - Main body

IMADA.CO., LTD Automatic Crimp Tester ACT-1000N [ISO Calibration Service and Calibration Certificate] -We are the accredited ISO / IEC 17025: 2017 Calibration Organization with the in-house Calibration Service facility. -The Calibration Service and Issuing of the Calibration Certificates available at cost. -For further information, please kindly contact the local authorized distributor or us. [Cautions] - Information in this document is subject to change without prior notice. - This document is product descriptions and handling precautions, and do not guarantee various characteristics or safety....