IMADA CO., LTD. Advanced Type Motorized Torque Stand ACMTS series Advanced Type Motorized Torque Stand ACMTS series ● Accomplished uniform rotational speed for higher accuracy in torque measurement ● Possible to control operation by torque value and angle ● Performs torque-angle measurement ● Speed ranges from 0.6˚ to 240˚/sec allow for a variety of measurement requirements [Improved Reproducibility of Torque Measurement] Uniform rotational speed with improved torque measurement reproducibility [Accomplished Accurate Angle Control and Torque Angle Measurement Precision] - Torque-angle measurements are possible when combined with the DTXA series. Precision in measurements is achieved at an angle accuracy of ±0.1˚±1 digit - The operation is controlled by the torque value and the angle. [Broad Choices of Jigs and Chucks] By switching the jigs and chucks, a variety of samples are measured (refer to page 4) ● Standard chuck MT-TB, Screw cap torque meter DTXS/A series and Standard table DT-TB for DTXS/A are sold separately. [ACMTS series Features] Feature 1: Constant Rotation Speed Constant rotational speed enables highly reproducible measurements. Uneven rotation speed causes unstable measurement values Manual Operation Installed to the ACMTS Torque Stand Constant rotational speed for highly reproducible measurements Feature 2: High Angle Accuracy within ±0.1˚ ±1digit (with the connected DTXA series) The combination with the DTXA digital torque meter realizes the accurate and precise torque angle measurement. ACMTS and DTXA connected with The dedicated cable The Angle data output from the ACMTS is displayed in DTXA By using graphing software Torque angles are plotted as graphs. (Image: Force Recorder Next Professional)

IMADA CO., LTD. Advanced Type Motorized Torque Stand ACMTS series Feature 3: Automatic Operation The operations are controlled by the torque value and angle: Stop and Reverse rotation. e.g., Lipstick container turning Torque Test (Durability) Forward： Extend the lipstick to the specified angle ● Set comparator Value Upper Limit：＋2.000N-m Lower Limit：－0.650N-m ● Set Angle Forward：480° Reverse：3600° Reverse: Repeat the same movement until the specified torque value is measured. After starting and reaching the set angle (480˚), the operation automatically pauses and starts reverse rotation. Then,...

IMADA CO., LTD.Advanced Type Motorized Torque Stand ACMTS seriesSpecifications: ACMTS series] Specifications *1 Stroke is the maximum and minimum sample heights when a standard attachment and a standard table with standard pins are attached. Customized torque stand according to the sample height is available. The measurement sample height can be adjusted with a customized extension shaft for a low-height sample with the ACMTS-10N-2L model. Please contact us for details. *2 The included dedicated cable connected to the DTXS/DTXA series is required for the torque value operation control. *3 Connecting...

Advanced Type Motorized Torque Stand ACMTS series [Example of ACMTS Attachments: Upper Side Fixtures (Separately sold)] [Additional Information] Tips for Appropriate Measurement - Fixing the sample with a constant force When measuring the opening/closing torque of jar or PET bottles, the force of gripping the sample affects the measured value. Therefore, it is necessary to grip the sample with a constant force. When fixing the sample with the standard chuck, tighten the M5 hexagon socket head cap bolt, at the knob center with a torque wrench or torque driver with a 4mm bit to tighten. Controlling...

Advanced Type Motorized Torque Stand ACMTS series A complete unit for the toque-angle measurement [Items Included in the Unit] - Screw Cap Torque Tester: DTXA series - Graphing software: Force Recorder Professional - Advanced Type Motorized Torque Stand: ACMTS-10N - Standard Chuck for ACMTS: MT-TB - Standard Table for DTXA: DT-TB Force Recorder Next Professional is the software for graphing torque-angle. • High sampling rate of max. 2000Hz enables accurate graphing. • Test condition presets: for effective recording / analysis of measurement results. • Data editing: overlaying up to 10 graphs,...

Advanced Type Motorized Torque Stand ACMTS series ■ S1 and S2 are the corresponding sample heights (maximum / minimum) with the standard chuck attachment (separately sold) / screw cap torque meter, and the standard table with standard pins installed.

IMADA CO., LTD. Advanced Type Motorized Torque Stand ACMTS series [Cautions] - Information in this document is subject to change without prior notice. - This document is product descriptions and handling precautions, and does not guarantee various characteristics or safety. - This product is designed for force measurement purpose only. - Do not copy and use this content without authorization. - A torque gauge (sold separately) is required to use this product. - Do not apply torque more than its capacity or from incorrect direction to the sensor. - Do not use this product in environments including...