MI 00 601
1Pages

MI 00 601 Il materiale MI 00 601 ha un medio/alto coefficiente di attrito ed e rinforzato da polveri metalliche. Questo materiale ha una bassa/media usura e risulta molto silenzioso durante l’utilizzo. Si presta facilmente al taglio, anche per spessori elevati. Il materiale e composto da resine fenoliche, fibre corte, particelle metalliche e filler. MI 00 601 is a molded friction material with a medium-high friction coefficient. The material is reinforced with metal components. MI 00 601 is quiet in performance and easy to cut regardless of its thickness. The material is composed by phenolic resins, short fibers, metal particles and fillers. Dati Tecnici / Technical Data Friction propieties (according graphics) Static Friction Coefficient (15bar, from box): 0.55±0.05 |i Static Friction Coefficient (15bar, 100°C): 0.60±0.05 |i Dynamic Friction Coefficient: see charts Wear Rate: see charts Friction coefficient vs Pressure Speed lOm/s; Temperature 100°C Physical properties Specific Gravity (ASTM D792): 1.80±0.05 gr/cm3 Ignition Loss (ASTM D7348): 43±2 % Mechanical properties Tensile Strength (ASTM D638): 10±2 N/mm2 Poisson Coefficient (ASTM D638): 0.18±0.03 Young Modulus (ASTM D638): 2500±100 N/mm2 Recommended Working Values Perlitic cast iron, hardness HB150-200 Thermosetting adhesive Others Recommended Mating Surface: Recommended Adhesives: Rubbing speed, temperature and pressure are related. Changing any values will change other. The values shown represent typical conditions, but are not ultimate limits of the material.