QC empty or assembled construction site boards (ACS)

INDUSTRIA LOMBARDA MATERIALE ELETTRICO SpA has been operating in Milan since 1938, in particular in the electrotechnical sector for the manufacturing of equipment for industrial installations. ILME reflects the traditional entrepreneurial spirit of Lombardy, and has enjoyed continuous expansion for over half a century. The company has carved an important role for itself in the main world markets, also operating directly in the countries that have assumed world leadership in the field of automation, including Germany and Japan. In the electrical connection sector with applications in industrial...

General Information and Standards for ACS Construction Site Boards A new QM series of portable boards has been added to the ACS ILME site boards, to be used on construction sites. The self-supporting frame, specifically designed for construction site environments, allows it to be used with ease without the need for other frames or additional supports. The new series is suitable for many working environments (such as fair stands and temporary structures, industrial environments, areas used in the zootechnical and food industries etc.), i.e. in all circumstances where temporary power distribution...

ILME distribution boards for construction sites The ILME range of Q series of construction site boards comprises: - Two empty board assembly kits (QP V and QG V) for housing an array of interlocked industrial socket-outlets with relative automatic switchgear devices for protection against direct and indirect contacts and against overcurrents and short circuits. - four series of site boards (QP TI, QP SQ, QG TI and QG SQ) factory-assembled (ACS) and including sockets and protection and control devices. Upon customer request, boards with combinations of custom-built socket-outlets may be supplied....

general information and standards for ACS construction site boards General information and standards. Construction and demolition sites are subject to a high number of electric accidents, and even fatal accidents (source: ISPESL National Institute for Occupational Health and Safety). Construction sites are high risk environments, and especially subject to electric hazards due to the conditions of use of the electric system which is often external and subject to atmospheric conditions or those connected to the nature of the construction materials present in the site (sun, rain, dust, frost, high...

general information and standards for ACS construction site boards Definition of construction site assemblies Construction site boards may only be ACS type. ACS: Mass-produced assemblies for construction sites (European Standard EN 60439-4) A combination of one or more transformation or closure and cutoff devices with assemblies associated with the control, measurement, signalling, switchgear and adjustment equipment, complete with all relative electrical and mechanical connections and all relative structural parts, designed and constructed for use in all indoor and outdoor sites. The ASC must...

general information and standards for ACS construction site boards ACS construction site boards - diagram On the basis of the construction characteristics (plugs and socket-outlets used, protection devices) and the electrical characteristics (rated current, and so the maximum active power foreseeable), the ILME construction boards are defined as final distribution ACS or socket-outlets ACS, to be connected upstream to a larger ACS. On the basis of the specific requirements of the various functional types of ACS referred to in the standard EN 60439-4 (§ 9) listed in the preceding page, the ILME...

QM - factory assembled board for construction sites (ACS) differential protection with intervention charateristc AC, I∆n = 0,03 A and I∆m = 6 kA power cableI = 4m, type H07 RN-F 2G2,5, 3G2,5, 4G2,5 or 4G4 according to rated current and wired plug q with Italian Quality Mark with socket-outlet PEW PQ / PQF series plug entry magnetothermal mains switch with differential protection magnetothermal mains switch with differential protection with socket-outlet PEW PQ / PQF series maximum withdrawable active power values maximum withdrawable active power values * 16A magnetothermal switch in addition...

QM - factory assembled board for construction sites (ACS) differential protection with intervention charateristc AC, I∆n = 0,03 A and I∆m = 6 kA power cableI I=4m, tipo H07 RN-F 2G2,5, 3G2,5, 4G2,5 o 4G4 according to rated current and wired plug q with Italian Quality Mark * 16A magnetothermal switch in addition to the magnetothermal mains switch with different protection ** without IMQ approval plug entry with interlocked socket-outlet SQE series maximum withdrawable active power values magnetothermal mains switch with differential protection For technical data-sheet and further information...

QC - box and factory assembled boards for construction sites (ACS) with socket-outlets TM and SQV series assembled board consisting of wall-mount entry plug, basic board QP V, main emergency push-botton and release coil degree of protection IP55 (EN 60529), in compliance with standard EN 60439-4 q with Italian Quality Mark with socket-outlets SQV series magnetothermal mains switch with differential protection with socketoutlets TM series maximum withdrawable active power values magnetothermal mains switch with differential protection in shock proof and self-extinguishing thermoplastic material,...

QC - box and factory assembled boards for construction sites (ACS) with socket-outlets TM and SQV series maximum withdrawable active power values with socket-outlets SQV series maximum withdrawable active power values magnetothermal mains switch with differential protection QG QG QG QG QG QG magnetothermal mains switch with differential protection with socketoutlets TM series assembled board consisting of wall-mount entry plug, basic board QG V, main emergency push-botton and release coil degree of protection IP55 (EN 60529), in compliance with standard EN 60439-4 q with Italian Quality Mark...