PES 16A Industrial sockets and plugs
19Pages

PES 16A Industrial sockets and plugs

INDUSTRIA LOMBARDA MATERIALE ELETTRICO SpA has been operating in Milan since 1938, in particular in the electrotechnical sector for the manufacturing of equipment for industrial installations. ILME reflects the traditional entrepreneurial spirit of Lombardy, and has enjoyed continuous expansion for over half a century. The company has carved an important role for itself in the main world markets, also operating directly in the countries that have assumed world leadership in the field of automation, including Germany and Japan. In the electrical connection sector with applications in...

New PES series plugs and socket-outlets with SQUICH® connection tim The evolution of the ILME plugs and socket-outlets is the result of over forty years of experience acquired by es ILME SpA. av er Safety, fast connection and ease of use are the main features of the new PES series, thanks to the innovative technical features introduced, allows wiring times to be reduced by 50% as compared to conventional models. It is in fact sufficient to press the actuator button (pin) to close the spring device of the corresponding terminal, which is supplied open to customers. This enables the...

New PES series plugs and socket-outlets with SQUICH® connection Actuator buttons are supplied in lifted position and with an open terminal. They are colour-coded in brown/black/grey/blue/yellow-green to allow operators to quickly identify the functions of the terminals associated to the corresponding contacts: - Brown/Black/Grey = Phase contacts - Blue = Neutral contact (when present) - Yellow/Green = PE earth contact. The following markings are also present: L1, L2, L3 N, m. Actuator buttons are arranged in appropriate slots that are situated opposite to after those where the conductors...

New PES series plugs and socket-outlets with SQUICH® connection To further simplify assembly, even the procedure for the insertion of the pre-wired insert is very fast and user-^ - position the earthing contact in the required hour reference. (earthing contact positioned at 4h) (earthing contact positioned at 6h) (earthing contact positioned at 9h) the above applies to socket-outlets. Plugs are situated in a mirrored position as compared to socket-outlets. Fully push the insert into the enclosure.

New PES series plugs and socket-outlets with SQUICH® connection To release the plug or socket insert from its seating, simply fully push in and then remove a 4 mm or 5 mm flat screwdriver in each of the slots located along the outer perimeter of the insert in succession (two or three depending on the polarity and size of the socket or plug insert). This system generates single-block, robust insert protection enclosures. The configuration consisting in a single component offers greater resistance to shocks, falls and mechanical stresses.

New PES series plugs and socket-outlets with SQUICH® connection tim The main features of the enclosures are: es New cable gland with “locking ring” and a robust and reliable “pliers-like” cable clamp: both items can be tightened av manually without tools and do not require further screws to be fixed in place. Both products adapt to all permitted er cable dimensions and avoid the need of cutting or stripping grommets. This significantly reduces wiring times. - The new cable gland is suitable for cables with a diameter ranging from 7 to 16 mm (2P+m and 3P+m models) and from 8 to 24 mm (3P+N+m...

PES plugs and socket-outlets for industrial use General characteristics Mechanical features The range of products covers a wide number of different installation requirements. Plugs and socket-outlets are suitable for mobile installations. These construction features enable ILME plugs and socket-outlets to be used in the most demanding applications: - Mechanical resistance Tested in accordance with the requirements of Article 24 of standard IEC 60309-1 - Mechanical industry - Shipbuilding industry - Chemical and petrochemical industry - Services sector - Building industry - Agricultural and...

PES/PESW...SV plugs, low voltage from over 100V up to 415V q Compliant with IEC 60309-1 and -2 q Enclosure, insert and locking ring in insulating, thermoplastic, self-extinguishing material q PES...SV types (IP44), entry with cable gland colour coded according to the ope- rating voltage, RAL 7035 grey enclosure q PESW...SV types (IP66/IP67), entry with cable gland colour coded according to the operating voltage, RAL 7035 grey enclosure, locking ring with gasket colour coded according to operating voltage q Terminals with retained screws q IP44 and IP66/IP67 degrees of protection (IEC 60529)...

PES/PESW...PV couplers, low voltage from over 100V up to 415V q Compliant with IEC 60309-1 and -2 q Enclosure, insert and spring lid in insulating, thermoplastic, self-extinguishing material q PES...PV types (IP44), RAL 7035 grey enclosure, spring lid colour coded accor- ding to the operating voltage, entry with cable gland q PESW...PV types (IP66/IP67), RAL 7035 grey enclosure, spring lid with locking ring and gasket colour coded according to the operating voltage, entry with cable gland q Terminals with retained screws q IP44 and IP66/IP67 degrees of protection (IEC 60529) Earthing...

accessories threaded adaptor for loose inserts and plugs - for PES/PESW...SV/PV 16A models, 2 poles+m and 3 poles+m - for PES/PESW...SV/PV 16A models, 3 poles+N+m and 32A all models 1) threading for fittings and cable glands 2) screw designed for two purposes: – to fix insert to anchor wire – to fix the adaptor in place for heavy duty applications Replacement sequence: - Remove the cable anchoring ring from the housing, keeping the sealing gasket and the clamp in place. - Install the sheath retainer with the sheath and cable (not supplied) on the cable anchoring ring with the threaded exit...

standards for plugs and socket-outlets EN 60309-1 and EN 60309-2 standards In 1990, CENELEC (European Electrotechnical Standards Committee) introduced the provisions of the international publications IEC 60309-1 and IEC 60309-2 into the two corresponding European standards EN 60309-1 and EN 60309-2 (classification CEI 23-12/1 and 23-12/2). IEC (International Electrotechnical Commission), the worldwide organisation for electrotechnical standardisation, had adopted these publications basing them almost entirely on the EEC 17 Publication of 1958, now withdrawn, issued by the now dissolved...