*mydirectindustry

Catalogs
ILME
Multipole connector 2019

Multipole connector 2019

Product catalog summary

Overview
ILME is a prominent player in the industrial electrical connection sector, recognized for its innovation and high-quality products. The company provides a wide range of solutions for heavy-duty electrical power connections, adhering to EU safety standards.

Specifications and Standards
ILME connectors comply with the EU Low Voltage Directive 2006/95/EC and EN 61984 standards. They are tested as complete systems to ensure safety and reliability, with CE marking indicating compliance with EU directives.

Installation and Safety Procedures

Do not connect or disconnect connectors under load.
Ensure continuity of protective earth connections post-wiring.
Use appropriate tools and torque to prevent damage.
Install connectors axially to avoid cable stress.
Utilize coding pins to prevent mismatched couplings.
Maintain IP protection with suitable enclosures and accessories.

Product Range

Inserts: CSH SQUICH® inserts with silver-plated contacts for up to 500 mating cycles, offering reduced wiring time and vibration resistance.
Enclosures: Various types for different environments, including high-temperature and electromagnetic compatibility versions.
Accessories: Locking devices, patch cord adapters, and hygienic cable glands.

Technical Features
Products include detailed specifications such as rated voltage, insulation resistance, and ambient temperature limits. SQUICH® technology is noted for efficiency and ease of use.

Compliance and Certification
ILME products meet international standards and bear voluntary conformity markings, emphasizing the use of ILME components to maintain product integrity and warranty.

MIXO Modular Units and Enclosures
The document details specifications and assembly instructions for ILME's MIXO modular units, focusing on the CX and RX series, including crimp contacts, frames, housings, and coding options.

Specifications

Crimp Contacts: Available for male and female inserts, with wire sizes from 0.14 mm² to 2.5 mm², rated for 10A and 150V.
Frames and Housings: Made from die-cast zinc alloy, supporting modular units with lock-in tabs, available in sizes for 2 to 6 units, with polarization features and coding pins.
Enclosures: Types include T-TYPE, C7, V-TYPE, and E-Xtreme®, with protection ratings up to IP68.
Technical Features: Components made from self-extinguishing thermoplastic resin, designed for ≥ 10,000 cycles, with insulation resistance of ≥ 10 GΩ and contact resistance of ≤ 3 mΩ.

Procedures

Assembly Instructions: Steps for assembling MIXO ONE enclosures and hoods, including recommended tools and screws.
Installation Guidelines: Instructions for module positioning in frames for correct coupling of hoods and housings.

Standards and Compliance

Components comply with EN 61984, pending certifications from cURus, CSA, CQC, DNV-GL, BV, and EAC.
Rated voltage according to UL/CSA is 250V.

Recommendations

Use ILME homologated crimping tools for optimal performance.
Refer to the CN.16 catalogue for additional information on crimping tools and gold plating options.

Key Features

Modular units allow flexible configurations with high mating cycles.
Enclosures provide robust protection, suitable for outdoor use.
Coding pins offer up to 16 configurations to prevent mismatching.

Technical Features of Housings
Bulkhead and surface mounting housings with a single stainless steel rigid lever are suitable for high mechanical load applications, providing IP66 protection when mated and locked without a hinged cover, and IP65 with a hinged metal cover. Special versions are available for aggressive environments and high temperatures.

Enclosure Specifications
Available in various sizes and configurations, including standard versions with aluminum or plastic covers, ensuring IP66 or IP65 protection when properly mated and locked.

Surface Mounting Housings
Feature a SIMPLEX self-closing hinged cover made from self-extinguishing thermoplastic material reinforced with glass fiber, available with V-Type or IL-BRID locking levers, providing IP44 protection when not locked and IP65 when locked.

Locking Devices
Details on locking devices for bulkhead and surface mounting housings, designed to prevent accidental opening, with optional padlocks for anti-tamper protection. Two versions are available: one with an eyelet for housing attachment and another with a loop for hood attachment.

Assembly Instructions
Instructions for the insertion and extraction of locking devices, emphasizing securing the locking lever to prevent unauthorized access or accidental disconnection.

Catalog excerpts

Newsbook multipole connectors

Open the catalog to page 1

THE TRADITION OF INNOVATION SINCE 1945 ILME designs and manufactures complete solutions for industrial connections. Headquartered in Milan and with subsidiaries in the key countries driving the progress of automation, ILME is an industry leader in the main world markets. People are vital to success and growth at ILME, sharing a passion for innovation, utmost responsibility and participation. The Company is committed to developing technology in the areas that most impact the future of the industries it serves: high quality and safe cabling, research on the most suitable materials, rapid turnaround...

Open the catalog to page 3

IMPORTANT NOTES Striclty tied to our general conditions of sales 1 ILME designs and manufactures complete solutions for Heavy Duty electrical power connections. The connector (although offered to the user as a variety of elements, usually inserts and enclosures, to allow the selection of the ideal combination) has been designed as a complete connector and tested to be compliant with the essential safety requirements of the EU Low Voltage Directive 2006/95/EC (2014/35/EU from April 20, 2016) and in particular the EN 61984 standard. The design of this “whole” system guarantees that every allowed...

Open the catalog to page 4

CE MARKING As from 1st January 1997, in order to make available electrical products on the European market, the manufacturer must ensure that these bear the relevant CE marking, in line with the Low Voltage Directive 73/23/ EEC* (implemented in Italy as L. D. 18-10-1977 no. 791) and its modification 93/68/EEC* (implemented in Italy as L.D. 25-11-1996 no. 626/96, published in the supplement to the Gazzetta Ufficiale of 14-12-1996). The CE marking must be visible on the product or, if this is not possible, on the packaging, the instructions for use or on the warranty certificate. It acts as a declaration...

Open the catalog to page 5

CSH SQUICH® INSERT “S” VERSION CSHF/M 06 S, CSHF/M 10 S CSHF/M 16 S (16 SN), CSHF/M 24 S (24 SN) Technical features 15-21 JSH SQUICH® INSERT “S” VERSION JSHF/M 06 S, JSHF/M 10 S JSHF/M 16 S (16 SN), JSHF/M 24 S (24 SN) Technical features 23-29 HNM RX SERIES - HIGH NUMBER OF MATINGS RXF/M 12/2 Technical features

Open the catalog to page 7

MIXO modular units MIXO SERIES SQUICH® SERIES THE COMPLETE RANGE OF MODULES CX 05 SHF/SHM Technical features 46 CX 42 DF/DM Technical features

Open the catalog to page 8

MIXO ONE ENCLOSURES CXA - MXA SINGLE MODULE Technical features MKA IF METAL HOUSINGS size “21.21” Main features C-TYPE STANDARD METALLIC VERSION MKAX IF Technical features MKA IF - MKAXX IF Technical features W-TYPE FOR AGGRESSIVE ENVIRONMENTS MKAXW IF Technical features MKAXXW IF Technical features EMC VERSION FOR ELECTROMAGNETIC COMPATIBILITY MKAXS IF Technical features MKAS IF - MKAXXS IF Technical features 180 °C VERSION FOR HIGH TEMPERATURES MKAXR IF Technical features MKAXXR IF Technical features

Open the catalog to page 9

MKAS IVG20 EMC VERSION size “21.21” FOR ELECTROMAGNETIC COMPATIBILITY Main features MKAXS Technical features MKAS - MKAXXS Technical features M25 INSULATING HOODS MK - MKG size “21.21” Main features MKA VG25 METAL HOODS M25 CABLE ENTRY Main features C-TYPE STANDARD METALLIC VERSION MKAX Technical features MKA - MKAXX Technical features W-TYPE FOR AGGRESSIVE ENVIRONMENTS MKAXW VG25 Technical features MKAXXW VG25 Technical features EMC VERSION FOR ELECTROMAGNETIC COMPATIBILITY MKAXS IF Technical features MKAS IF - MKAXXS IF Technical features

Open the catalog to page 10

M25 METAL HOODS - IP68 HIGH PROTECTION MGK V25, MGK V25 B Main features HOODS WITH PEGS FOR CENTRAL LEVER CAV/MAV GYC, CFV/MFV GYC Main features SIZE “77.62“ HOUSINGS WITH SINGLE STAINLESS STEEL RIGID LEVER Main features CHIX - CHPX Technical features SURFACE MOUNTING HOUSINGS WITH SIMPLEX SELF-CLOSING HINGED COVER Main features CV - CVA / MVP - MVAP Technical features

Open the catalog to page 11

LOCKING DEVICE FOR “CLASS“ LOCKING LEVERS CR CLK Technical features LOCKING DEVICE FOR ENCLOSURE SIZE “104.27“ WITH CENTRAL LEVER CR YLK24 - CR YLK24 SL Technical features ANCHORAGES FOR MIXO FRAMES CR 16 SSD - CR 24 SSD Technical features PE TERMINAL ADAPTERS FOR MIXO FRAMES CGT 6.0 - 10 - 16 - 25 Technical features

Open the catalog to page 12

RJ45 UNIVERSAL PATCH CORD ADAPTER Technical features HYGIENIC CABLE GLANDS AH M25IF(L) - AH M32IF(L) Technical features Part numbers index

Open the catalog to page 13

CSHF/M SQUICH® INSERTS “S” VERSION (06, 10, 16, 24, 32, 48 poles) CSH S inserts series with actuator button, now with stamped silver-plated contacts Find more information on our products at www.ilme.c

Open the catalog to page 14

TECHNICAL FEATURES CSHF/M 06, 10, 16 (16 SN), 24 (24 SN) S Demand for cost-effective solutions for large serial production is constantly growing and stamped contacts meet the basic needs fur such applications. - Silver plating of the contacts, suitable for up to 500 mating cycles; - features all the well-known advantages of the SQUICH® proprietary technology: • reduced wiring time (spring-clamp terminals are presented “open”, with the actuator button lifted up); up to 50% saving time compared to screw connection; • operator skill independence (no need to open the spring-clamp terminals by direct...

Open the catalog to page 15

C-TYPE IP65/IP66 240-243 C7 IP67, single lever 274 V-TYPE IP65/IP66, single lever 280-284, 286 BIG hoods 304-306 T-TYPE IP65 insulating 326-327 T-TYPE / W IP66 insulating 336-337 HYGIENIC T-TYPE / H IP66/IP69 350-351 HYGIENIC T-TYPE / C IP66/IP69, -50 °C 358-359 W-TYPE for aggressive environments 373 EMC 392 Central lever 404-405 IP68 420-423 LS-TYPE 450-451 E-Xtreme® corrosion proof 42-43, 55, 62-63 * panel supports: COB * refer to NEWS 2017 pages  refer to CN.16 pages inserts, spring terminal connections  STAMPED CONTACTS, SILVER PLATED  FROM NOVEMBER 2019 spring terminals with actuator...

Open the catalog to page 16

C-TYPE IP65/IP66 244-249 C7 IP67, two levers 275 V-TYPE IP65/IP66, single lever 281-288, 291 BIG hoods 308-311 T-TYPE IP65 insulating 328-329 T-TYPE / W IP66 insulating 338-339 HYGIENIC T-TYPE / H IP66/IP69 352-353 HYGIENIC T-TYPE / C IP66/IP69, -50 °C 360-361 W-TYPE for aggressive environments 374 EMC 393 Central lever 406-407 IP68 424-427 LS-TYPE 452-453 E-Xtreme® corrosion proof 44-45, 56, 64-65 * panel supports: COB * refer to NEWS 2017 pages  refer to CN.16 pages inserts, spring terminal connections  STAMPED CONTACTS, SILVER PLATED  FROM NOVEMBER 2019 spring terminals with actuator button...

Open the catalog to page 17

All ILME catalogs and technical brochures

Archived catalogs

2019 Plugs and sockets for industrial use
36 Pages
2016 Plugs and sockets for industrial use
32 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list