APV ATEX
1 / 23Pages

APX Containing boxes APV ATEX

INDUSTRIA LOMBARDA MATERIALE ELETTRICO SpA has been operating in Milan since 1938, in particular in the electrotechnical sector for the manufacturing of equipment for industrial installations. ILME reflects the traditional entrepreneurial spirit of Lombardy, and has enjoyed continuous expansion for over half a century. The company has carved an important role for itself in the main world markets, also operating directly in the countries that have assumed world leadership in the field of automation, including Germany and Japan. In the electrical connection sector with applications in...

APX ATEX containing boxes ILME has a long history of manufacturing die-cast aluminium alloy containing boxes to meet the protection requirements of industrial environments. AP series containing boxes are now available in a new version called APX. APX containing boxes are Ex components and therefore suitable for fixed installations in explosive atmospheres due to the presence of gases and/or dust, classified as Zone 2 (gases) and/or Zone 22 (dust) in ATEX Directive 94/9/EC. The range covers the 7 sizes that are now available in the ATEX version (APX) painted in RAL 7040 grey (like APV...

Product features Distribution boxes made of EN AB 46100 aluminium alloy (previously UNI 5076) in accordance with standards UNI EN 1676 and oven painted with RAL 7040 epoxy-polyester resins Supplied with: - Cover with pre-fastened gasket - AISI 304 stainless steel screws to fix the cover in place - O-ring in nitrile rubber to hold the cover screws in place (captive screws) - internal equipotential bonding kit (for example between the box and the cover), which includes 1 M4x8 threaded brass insert, 1 M4x8 zinc-plated steel 1 screw, 1 ring lug in tinned copper for a cross-sectional area up to...

Via M. A. Colonna 9 - 20149 Milano (ITALY) Example of marking and description of the symbols used on the nameplate Manufacturer's logo (I.L.M.E. SpA) Via M. A. Colonna 9 20149 Milano (ITALY) Manufacturer's address (mandatory for ATEX Directive 94/9/EC) C E marking (that indicates conformity with the Low Voltage Directive 2006/95/EC) Reference to type of product (product code) Ex symbol that indicates the specific marking related to the protection against the risk of explosion referred to in ATEX Directive 94/9/EC Group, indicates the type of intended use for which the product is suitable: G...

Via M. A. Colonna 9 - 20149 Milano (ITALY) Via M. A. Colonna 9 - 20149 Milano (ITALY) Via M. A. Colonna 9 - 20149 Milano (ITALY) Via M. A. Colonna 9 - 20149 Milano (ITALY) Via M. A. Colonna 9 - 20149 Milano (ITALY) Via M. A. Colonna 9 - 20149 Milano (ITALY)

Background information on ATEX The name ATEX, although unofficial, is today universally used to refer to European Directives 94/9/EC and 1999/92/EC. This acronym derives from the French term ATmosphère EXplosible. - Directive 94/9/EC is also know as the "Directive on ATEX products" or also called by insiders “ATEX 95” or alternatively “ATEX 100a”, based on the articles of the Treaty that established the creation of the European Community (now European Union), which specifies that the Council may adopt, by means of directives, measures to support and regulate the internal market. This...

Declaration of conformity - Warnings Every product that complies with Directive 94/9/EC must be supplied with an EC declaration of conformity that must contain at least the following information: - Name or trademark and address of the manufacturer - Description of the equipment - Provisions to which the equipment complies - Name, identification number and address of the notified body - "Type EC" certificate number - Identification data of the signee binding the manufacturer or the EU representative - Reference to (if applicable): harmonised standards, technical specifications used and other...

To determine if these conditions may occur, it is necessary to follow the procedure described below. Analysis of emissions - Assessment of the substances used and identification of combustive dusts - Acquisition of all data on the chemical-physical properties of the combustive dusts involved and as required for assessment purposes - dentification of the emission sources, intended as points or parts of a processing plant from which combustive dust may leak causing the formation of a I potentially explosive atmosphere ote: a layer of dust may represent a source of emission because it could...

Example of equipment classification: Group I = Mining sites II = Surface plants G = Protection from gases D = Protection from dust Category 1 (very high level of protection, explosive atmosphere that is permanently/frequently present or present for long periods of time) For zone: 0 20 Atmosphere: G D Category 2 (high level of protection; occasional presence of an explosive atmosphere) For zone: 1 21 Atmosphere: G D Category 3 (standard level of protection, unlikely presence of an explosive atmosphere) For zone: 2 22 Atmosphere: G D Type of protection for electric equipment = Increased...

Example of equipment classification: Symbol that confirms that the product is classified as Ex component Protection level assigned for: - G Gaseous atmosphere - D Dusty atmosphere c = Equipment protection level (c = increased) Temperature class: - Gases T1 = 450 °C T2 = 300 °C T3 = 200 °C T4 = 135 °C T5 = 100 °C T6 = 85 °C - Dust Txx °C = Ambient temperature range (dust) Groups of equipment: I = For use in mining sites II = For use in atmospheres with explosive gases (other than mining sites) Example: IIA propane, IIB ethylene, IIC hydrogen/acetylene III = For use in atmospheres with...

APX ATEX containing boxes with cover - Usable with non-sparking parts - Boxes and covers in die-cast aluminium alloy - Stainless steel cover screws - Pre-applied anti-ageing gaskets - IP66/IP67 degree of protection (compliant with EN 60529) - Temperature range: -20 °C ÷ +85 °C - Oven painted with RAL 7040 grey epoxy-polyester powder - For information on the accessories for boxes, refer to page 11 - Supplied with 2 brass inserts, 2 screws, 2 lugs and 2 washers for 6 mm2 earth terminals - Supplied with M4 stainless steel self-forming screw, lug and washer for 6 mm2 external earth terminals -...