Machines and tools for thermoforming and packaging technology Sheet processing machines Automatic roll-fed thermoformers Automatic roll-fed thermoformers, separate forming and punching, Skin and blister packaging machines Form, fill and seal lines ILLIG-produced tooling Automatic pressure Technical data Depth of draw female/male max Closing force of forming station Electrical connected load-top heater Electrical connected load-bottom heater kW 22.5 Total connected load with bottom and top heater kW 50.85 Heat dissipation top heater Heat dissipation top and bottom heater Compressed air consumption for each cycle with 6 bar I 140 Total length of machine with material roll-diameter: Total width of machine without control cabinet mm 2400 Total height of machine Weight without roll stand and tool Standard colour white/blue RAL 9002 and RAL 5013

Automatic pressure former RDM 58/3 for shallow items High hourly output dueto large forming area and large number of production cycles. The automatic pressure former for shallow packaging items is designed for tools con- sisting of several rows. Forming is effected without plug-assist. The finished products are discharged in upward direction through thetop part of the tool into a counting and stacking unit. The results in a trouble-free stacking of snap-on lids. The bases of those lids are con- siderably higherthan the outercutting contour Roll stand The roll stand has a material roll shaft -...