*mydirectindustry

PPFG

Product catalog summary

Introduction
This document provides technical specifications and guidelines for the use of ILC's PPFG pneumatic drum pumps, designed for grease or oil lubrication systems. It emphasizes the importance of using the products as intended and adhering to safety regulations, especially when dealing with hazardous materials.

Specifications
The PPFG pneumatic drum pumps are suitable for centralized lubrication systems and can handle large systems with multiple points. Key specifications include:

Power supply: Min 2 Max 8 bar compressed air
Compression ratio: 50:1
Max output pressure: 400 bar
Flow rate: 2900 g/min
Compressed air connection: F 1/4" BSP
Product output connection: M 1/4" BSP
Max air consumption at 8 bar: 78 L/min
Pumping diameter: 28 mm

Product Variants
The pumps are available in different sizes to fit drums of 25 Kg, 50 Kg/60 L, and 180 Kg/200 L. Each variant has specific dimensions and weights.

Accessories
Several accessories are available to complement the PPFG pumps, including:

Drum cover
Presser disc
Trolley
Gun with flex (2 m)
Complete pump kit with trolley, cover, gun, and presser disc

Usage Recommendations
It is recommended to install a line filter at the outlet to protect the system from impurities. The document also stresses the importance of consulting ILC and obtaining written approval before using the system with hazardous materials.

Contact Information
For further inquiries, ILC can be contacted at their office in Gorla Minore, Italy, via phone or email.

Catalog excerpts

lubrication systems DRUM PUMP

Open the catalog to page 1

All ILC products must only be used for their intended purposes, as specified in this brochure and in all instructions. If the product is supplied together with user instructions, the user is required to read them and comply with them. Not all lubricants are suitable for centralised lubrication systems. ILC lubrication systems or relative components cannot be used together with gas, liquid gas, pressurised gas in solution and liquids with vapour pressure exceeding normal atmospheric pressure (1013 bar) by more than 0.5 bar, maximum temperature permitted. Any type of dangerous materials, in particular...

Open the catalog to page 2

PPFG PPFG pneumatic drum pumps are intended for the provision of grease or oil lubrication systems where progressive dividers are used, or to fill tanks. Their high level flow rate and pressure performance allows them to supply very large systems with a high number of points or to supply dividers with just one point (with grease nipple at inlet). They are suitable for installation on commercial tanks with a 25.60 or 200 kg capacity. It is recommended to install a line filter at the outlet capable of protecting the system from impurities in the lubricant. Order codes A fastening ring nut 31.510.0...

Open the catalog to page 3

Accessories Drum cover Drum Presser disc Code I.L.C. srl - Via Garibaldi, 149 - 20155 Goria Minore - Italy Phone +39 0331 601697 - Fax +39 0331 602001 - www.ilclube.com - [email protected]

Open the catalog to page 4

PPFG Gun with flex 2 m Code Pump kit and trolley Kit complete with pump, trolley, cover, gun with flex 2m and presser disc. I.L.C. srl - Via Garibaldi, 149 - 20155 Gorla Minore - Italy Phone +39 0331 601697 - Fax +39 0331 602001 - www.ilclube.com - [email protected]

Open the catalog to page 5

I.L.C. srl - Via Garibaldi, 149 - 20155 Gorla Minore - Italy Phone +39 0331 601697 - Fax +39 0331 602001 - www.ilclube.com - [email protected] MADE IN ITALY

Open the catalog to page 6

PPFG

PPFG

Catalog excerpts

All I.L.C. srl catalogs and technical brochures