*mydirectindustry

PEGPEO

Product catalog summary

Overview

This document details the technical specifications, operational guidelines, and ordering information for ILC's PEG and PEO series lubrication pumps designed for progressive lubrication systems. These pumps automate grease or oil lubrication for industrial machinery.

1. General Specifications and Usage Conditions

Power Supply: 250 V AC / 125 V DC for standard PEG-PEO pumps; 24 V / 12 V motors for PEG-PEO 25N/210N series.
Protection Rating: IP65 for standard pumps; IP54 for 25N/210N series motors.
Operating Pressure: Maximum 300 bar (4200 PSI), recommended max 350 bar.
Reservoir Capacity: 5 or 10 kg for grease (PEG), 5 or 10 liters for oil (PEO).
Temperature Range: -30 °C to +80 °C.
Lubricant Compatibility: Grease up to NLGI 2 consistency; mineral oils with viscosity 50-1500 cSt.
Delivery Fitting: 1/4" G.
Restrictions: Not suitable for gases or liquids with vapor pressure >0.5 bar above atmospheric; hazardous materials require ILC approval.

2. Pump Design and Operation

Metal tank construction with optional minimum level control sensor.
Supports intermittent or continuous operation with pre-programmed lubrication cycles.
Internal shaft coupled to a spatula device ensures lubricant intake even with thick grease at low temperatures.
Gearmotor drives an internal cam operating up to three external pumping elements.
Each pumping element has an adjustable pressure relief valve for overpressure protection.
Flows from multiple pumping elements can be combined into a single outlet to increase flow rate.
Vertical mounting required using integrated fixing bracket.

3. Electric Motor Features

Standard pumps use three-phase motors (90 W, IP55, insulation class F, continuous service S1).
Single-phase motors (115 V or 230 V AC) and special voltages available on request.
PEG-PEO 25N/210N series use 12 V or 24 V motors (85 W, 1500 rpm, IP54, insulation class F, continuous service S1).

4. Pump Models and Ordering Information

PEG-5N and PEG-10N: Grease pumps with 5 kg and 10 kg tanks; fixed or adjustable flow rates; single outlet standard; additional pumping elements ordered separately.
PEO-5N and PEO-10N: Oil pumps with 5 L and 10 L tanks; similar features to PEG series.
PEG-25N and PEG-210N: Grease pumps with 5 L and 10 kg tanks powered by 12 V or 24 V motors; adjustable flow rate options.
PEO-25N and PEO-210N: Oil pumps with 5 L and 10 L tanks, 12 V or 24 V motors.
SM Versions: Pumps supplied without motors.

5. Accessories

Grease inlet filters to prevent impurities during filling.
Fixed and adjustable flow rate pumping elements to feed multiple lines or increase delivery.
Power supply blocks with pressure gauges, safety valves, grease nipples, and sensors for pressure monitoring and protection.
Sensors with stainless steel bodies, IP67 protection, voltage 6-30 V DC, max 200 mA output, temperature range -25°C to +70°C; trigger alarms on high pressure.
Two-way and three-way joints with integrated pressure gauges and sensors rated up to 250 bar for overpressure detection.

6. Installation and Maintenance Recommendations

Mount pumps vertically using the integrated fixing bracket.
Ensure lubricant compatibility and adhere to pressure limits.
Use adjustable pressure relief valves to prevent overpressure damage.
Consult ILC before using hazardous or non-standard lubricants.
Adjust flow rates by loosening lock nuts and turning adjustment screws; ensure proper tightening after adjustment.

7. Operational Guidelines and Adjustments

Adjustable pumping elements allow precise control of lubricant volume per cycle (0-100%).
Safety valves protect system components; external valves can be added if necessary.
Proper maintenance and monitoring are essential for system integrity and safety.

8. Ordering and Pricing Notes

Ordering codes specify pump models, flow rate options, and motor configurations.
Price variations may occur for non-standard motors; such requests require direct consultation with ILC.

Manufacturer Information

All products are manufactured by I.L.C. srl, Gorla Minore, Italy. Contact details include phone, fax, website, and email for technical support and ordering.

Summary

The ILC PEG and PEO pump series offer robust, versatile lubrication solutions for industrial machinery, supporting grease and oil lubrication with various tank sizes and motor options. Their design supports high pressure, adjustable flow rates, and multiple pumping elements for complex lubrication networks. Proper installation, adherence to specifications, and use of approved lubricants are critical for optimal performance and safety.

Catalog excerpts

lubrication systems pumps for progressive systems

Open the catalog to page 1

Technical data Operation 4 PEG-PEO 5N/10N/SM Electric motor features 5 PEG-PEO 25N/210N with 24V / 12V motor Electric motor features 24V / 12V 18 PEG-MI with hydraulic motor Hydraulic motor features 27 Overall dimensions (PEG-MI) 29 Grease inlet filters 31 Fixed flow rate pumping element 32 Power supply blocks 32 Adjustable flow rate pumping element 35 All ILC products must only be used for their intended purposes, as specified in this brochure and in all instructions. If the product is supplied together with user instructions, the user is required to read them and comply with them. Not all lubricants...

Open the catalog to page 2

Applications and operationDescription PEG/PEO 5N/10N are ideal for automatic lubrication of all types of industrial machines. Together with the DPL, DPX and DMX progressive dividers, they can lubricate over 300 points with a single pump. from 1 to 3 0.16 cc 0.01 - 0.16 cc Grease up to a max consistency of NLGI 2 Mineral oils 50-1500 cSt 300 Bar (4200 PSI) 5 kg or 10 kg (PEG) 5 or 10 L (PEO) from - 30 °C to + 80 °C 1 / 4" G Number of outlets Flow rate per cycle with fixed pumping element Flow rate per cycle with adjustable pumping element Suitable lubricants Maximum operating pressure Reservoir...

Open the catalog to page 3

Technical data The PEG/PEO 5N/10N/25N pumps have been designed for intermittent or continuous operation and provide pre-programmed lubrication cycles according to the applications. A gearmotor and a motor control an internal cam that operates up to 3 pumping elements mounted externally. Each pumping element is equipped with an adjustable pressure relief valve capable of protecting the pump and the elements from overpressure. It is possible to convey the flows of a second and third pumping element into a single outlet for a greater flow rate. Installation The pumps must be mounted vertically by...

Open the catalog to page 4

Electric motor features Motor for PEG-PEO 5N and 10N pumps The PEG-PEO series electric pumps have a standard configuration that has a three-phase motor. It is possible to supply single-phase motors 115 VAC, 230 VAC 50/60 Hz or motors with special voltages. For orders with motors of different voltages, add the voltage value to the relative code, for example 90.880.5 becomes 90.880.5.230. I.L.C. srl - Via Garibaldi, 149 - 20155 Gorla Minore - Italy Phone +39 0331 601697 - Fax +39 0331 602001 - www.ilclube.com - [email protected]

Open the catalog to page 5

PEG-5N electric pumpPEG-5N PEG-5N is an electric pump for grease equipped with a 5 kg metal tank. The standard version is supplied with a single outlet. Additional pumping elements must be ordered separately. with electric level *Any variations in the price due to the use of different motors than standard must be requested directly from HC. I.L.C. srl - Via Garibaldi, 149 - 20155 Gorla Minore - Italy Phone +39 0331 601697 - Fax +39 0331 602001 - www.ilclube.com - [email protected]

Open the catalog to page 6

I.L.C. srl - Via Garibaldi, 149 - 20155 Gorla Minore - Italy Phone +39 0331 601697 - Fax +39 0331 602001 - www.ilclube.com - [email protected]

Open the catalog to page 7

PEG-5N/SM electric pumpPEG-5N/SM Ordering code Reduction ratio PEG-5N/SM is an electric pump for grease equipped with a 5 kg metal tank, without motor. The standard version is supplied with a single outlet. Additional pumping elements must be ordered separately. Adjustable flow rate I.L.C. srl - Via Garibaldi, 149 - 20155 Gorla Minore - Italy Phone +39 0331 601697 - Fax +39 0331 602001 - www.ilclube.com - [email protected]

Open the catalog to page 8

PEG-10N is an electric pump for grease equipped with a 10 kg metal tank. The standard version is supplied with a single outlet. Additional pumping elements must be ordered separately. with electric level *Any variations in the price due to the use of different motors than standard must be requested directly from ILC. I.L.C. srl - Via Garibaldi, 149 - 20155 Gorla Minore - Italy Phone +39 0331 601697 - Fax +39 0331 602001 - www.ilclube.com - [email protected]

Open the catalog to page 9

I.L.C. srl - Via Garibaldi, 149 - 20155 Gorla Minore - Italy Phone +39 0331 601697 - Fax +39 0331 602001 - www.ilclube.com - [email protected]

Open the catalog to page 10

Ordering code Reduction ratio PEG-10N/SM is an electric pump for grease equipped with a 10 kg metal tank, without motor. The standard version is supplied with a single outlet. Additional pumping elements must be ordered separately. Adjustable flow rate I.L.C. srl - Via Garibaldi, 149 - 20155 Gorla Minore - Italy Phone +39 0331 601697 - Fax +39 0331 602001 - www.ilclube.com - [email protected]

Open the catalog to page 11

PEO-5N electric pump PEO-5N PEO-5N is an electric pump for oil equipped with a 5L metal tank. The standard version is supplied with a single outlet. Additional pumping elements must be ordered separately. With electric level Ordering code 90.892.0 90.892.2 90.892.5 90.905.0 90.905.1 Adjustable flow rate no *Any variations in the price due to the use of different motors than standard must be requested directly from ILC. I.L.C. srl - Via Garibaldi, 149 - 20155 Gorla Minore - Italy Phone +39 0331 601697 - Fax +39 0331 602001 - www.ilclube.com - [email protected]

Open the catalog to page 12

I.L.C. srl - Via Garibaldi, 149 - 20155 Gorla Minore - Italy Phone +39 0331 601697 - Fax +39 0331 602001 - www.ilclube.com - [email protected]

Open the catalog to page 13

Ordering code Reduction ratio PEO-5N/SM is an electric pump for oil equipped with a 5L metal tank, without motor. The standard version is supplied with a single outlet. Additional pumping elements must be ordered separately. Adjustable flow rate I.L.C. srl - Via Garibaldi, 149 - 20155 Gorla Minore - Italy Phone +39 0331 601697 - Fax +39 0331 602001 - www.ilclube.com - [email protected]

Open the catalog to page 14

PEO-10N electric pump PEO-10N PEO-10N is an electric pump for oil equipped with a 10L metal tank. The standard version is supplied with a single outlet. Additional pumping elements must be ordered separately. Adjustable flow rate no no no yes yes *Any variations in the price due to the use of different motors than standard must be requested directly from ILC. I.L.C. srl - Via Garibaldi, 149 - 20155 Gorla Minore - Italy Phone +39 0331 601697 - Fax +39 0331 602001 - www.ilclube.com - [email protected]

Open the catalog to page 15