PEG250N
12Pages

{{requestButtons}}

Catalog excerpts

PEG250N - 1

lubrication systems Electric pumps for progressive systems

Open the catalog to page 1
PEG250N - 2

Electric motor features 5

Open the catalog to page 2
PEG250N - 3

PEG-250N pumps are ideal for automatic lubrication of all types of industrial machines. Used together with the DPL, DPX and DMX progressive dividers, they can lubricate over 300 points with a single pump. Technical data Number of outlets Flow rate per cycle with fixed pumping element Flow rate per cycle with adjustable pumping element Suitable lubricants Grease up to a max consistency of NLGI 2 Maximum operating pressure Tank capacity Delivery fitting Electric level with float switch (oil) Electric level with capacitive sensor Operation PEG pumps were designed for intermittent or continuous...

Open the catalog to page 3
PEG250N - 4

The metal tank has a capacity of 25 Kg. Upon request, it can be provided with the minimum level control. The pumps can operate at a maximum recommended pressure of 350 bar with a maximum flow rate output of 0.16 cc/revs. The maximum relief valve is regulated at 250 bar. The internal shaft is coupled to a spatula device in the tank of the pump in order to ensure continuous intake of the pumping elements, also with grease having a consistency of NLGI 2 and an ambient temperature of -40 ºC. I.L.C. srl - Via Garibaldi, 149 - 20155 Gorla Minore - Italy Phone +39 0331 601697 - Fax +39 0331 602001...

Open the catalog to page 4
PEG250N - 5

Electric motor features The electric pumps have a standard configuration that has a three-phase motor. Upon request, it is possible to supply single phase motors 115 V AC, 230 V AC 50/60 Hz or motors with special voltages. For orders with motors of different voltages, add the voltage value to the relative code, for example 90.930.0 becomes 90.930.0.230. Single-phase Power supply voltage I.L.C. srl - Via Garibaldi, 149 - 20155 Gorla Minore - Italy Phone +39 0331 601697 - Fax +39 0331 602001 - www.ilclube.com - info@ilclube.it

Open the catalog to page 5
PEG250N - 6

Electric motor features PEG250N series electric pumps can mount a 24 V DC or 12 V DC motor. Absorption Service Insulation Protection rating Rpm 250 Bar 10 Bar 6 Bar 300 Bar from 700 to 5000 rpm 6.5 cc 4.5 L/min. 32.5 L/min. 6.50 cc/rev 8.79 Nm 0.92 kW PEG-250N series electric pumps can be equipped with a hydraulic motor. MAX inlet pressure MIN inlet pressure MAX continuous back pressure MAX peak inlet pressure Speed Flow rate per rev Minimum flow rate Maximum flow rate Displacement Torque (theoretic) at 100 bar Power 90° aluminium fittings of 3/8". Order 2 fittings for each pump. The...

Open the catalog to page 6
PEG250N - 7

standard motor PEG-250N is an electric pump for grease equipped with a 25 kg metal tank. The standard version is supplied with a single outlet. Additional pumping elements must be ordered separately. The standard pump is supplied with a three-phase motor. with electric level Order Reduction Cycles /1' Cycles /1' Flow rate code ratio 50Hz 60Hz adjustable without electric level Order Reduction Cycles /1' Cycles /1' Flow rate code ratio 50Hz 60Hz adjustable with minimum and maximum electric level Order Reduction Cycles /1' Cycles /1' Flow rate code ratio 50Hz 60Hz adjustable *Any variations in...

Open the catalog to page 7
PEG250N - 8

I.L.C. srl - Via Garibaldi, 149 - 20155 Gorla Minore - Italy Phone +39 0331 601697 - Fax +39 0331 602001 - www.ilclube.com - info@ilclube.it

Open the catalog to page 8
PEG250N - 9

PEG-250N 24V is an electric pump for grease equipped with a 25 kg metal tank and 24 V DC electric motor. The standard version is supplied with a single outlet. Additional pumping elements must be ordered separately. Order Reduction Electric code ratio level PEG-250N-MI is an electric pump for grease equipped with a 25 kg metal tank and hydraulic motor. The standard version is supplied with a single outlet. Additional pumping elements must be ordered separately. I.L.C. srl - Via Garibaldi, 149 - 20155 Goria Minore - Italy Phone +39 0331 601697 - Fax +39 0331 602001 - www.ilclube.com -...

Open the catalog to page 9
PEG250N - 10

I.L.C. srl - Via Garibaldi, 149 - 20155 Gorla Minore - Italy Phone +39 0331 601697 - Fax +39 0331 602001 - www.ilclube.com - info@ilclube.it

Open the catalog to page 10
PEG250N - 11

I.L.C. srl - Via Garibaldi, 149 - 20155 Gorla Minore - Italy Phone +39 0331 601697 - Fax +39 0331 602001 - www.ilclube.com - info@ilclube.it

Open the catalog to page 11
PEG250N - 12

I.L.C. srl - Via Garibaldi, 149 - 20155 Gorla Minore - Italy Phone +39 0331 601697 - Fax +39 0331 602001 - www.ilclube.com - info@ilclube.it MADE IN ITALY

Open the catalog to page 12

All I.L.C. srl catalogs and technical brochures

  1. PEGPEO

    39 Pages

  2. MPO

    6 Pages

  3. PPFG

    6 Pages

  4. CATOALOG

    66 Pages