*mydirectindustry

MPO

MPO

Product catalog summary

Introduction
This document provides technical specifications and guidelines for the use of ILC's MPO series electric pumps, designed for oil lubrication systems in progressive systems. It emphasizes the importance of using the products as intended and following all provided instructions.

Specifications
The MPO series electric pumps feature a three-phase multi-voltage motor with a power of 0.18 kW, protection rating of IP55, and insulation class F. They are suitable for continuous service (S1) and have a construction shape of B14. The pumps operate at a flow rate of 150 CC, 250 CC, or 500 CC per minute, with an adjustable operating pressure between 50 and 120 bar. They are compatible with oils ranging from 50 to 1000 cSt at 40°C and can operate in temperatures from -20°C to +80°C.

Motor and Power Supply
The pumps are available in both single-phase and three-phase configurations. The single-phase version operates at 115 V AC or 230 V AC with a frequency of 50/60 Hz, while the three-phase version operates at 220-240/380-420 V at 50 Hz or 254-280/440-480 V at 60 Hz.

Design and Features
The MPO pumps are equipped with a valve unit for priming and bypass functions, an electric minimum level indicator, a pressure switch, a filler cap with a filter, and an intake filter. They are designed for medium to large systems due to their high pressure and flow rate capabilities.

Dimensions and Order Codes
The document provides detailed dimensions for MPO pumps with different tank sizes (4, 5, 6, 8, 12, and 50 liters) and order codes for various configurations. The pumps can be ordered with or without tanks, and the dimensions vary accordingly.

Usage Restrictions
ILC products should not be used with gases, liquid gases, pressurized gases, or liquids with vapor pressure exceeding normal atmospheric pressure by more than 0.5 bar. Dangerous materials, as classified by European Community Directive 67/548/EEC, require consultation and written approval from ILC before use in their systems.

Conclusion
The MPO series electric pumps are robust and versatile, suitable for a range of industrial lubrication applications. Proper adherence to the specifications and guidelines is crucial for safe and effective operation.

Catalog excerpts

lubrication systems ELECTRIC PUMP FOR OIL for progressive systems

Open the catalog to page 1

AH ILC products must only be used for their intended purposes, as specified in this brochure and in all instructions. If the product is supplied together with user instructions, the user is required to read them and comply with them. Not all lubricants are suitable for centralised lubrication systems. ILC lubrication systems or relative components cannot be used together with gas, liquid gas, pressurised gas in solution and liquids with vapour pressure exceeding normal atmospheric pressure (1013 bar) by more than 0.5 bar, maximum temperature permitted. Any type of dangerous materials, in particular...

Open the catalog to page 2

Operating pressure 50 - 120 bar adjustable Lubricants Oils from 50 to 1000 cSt 40° C Operating temperature from -20° C to +80° C Minimum electric level 1.5 A - 250 V AC / 200 V DC - 50 W MPO series electric pumps have a standard configuration that has a three-phase multi-voltage motor. The pump motor unit is applied to a sheet-metal angle plate acting as a cover of the tank For orders with motors of different voltages, add the voltage value to the relative code, for example 00.860.0 becomes 00.860.0.115. DELTA CONNECTION Single-phase Power supply voltage I.L.C. srl - Via Garibaldi, 149 - 20155...

Open the catalog to page 3

MPO MPO electric pumps are intended for the provision of oil lubrication systems where progressive dividers are installed. A valve unit, which provides priming and bypass functions, is applied to the gear pump. They are also equipped with electric minimum level indicator, pressure switch, filler cap with filter and intake filter. Their high pressure and flow rate performance allow them to be used in medium and large size systems. I.L.C. srl - Via Garibaldi, 149 - 20155 Goria Minore - Italy Phone +39 0331 601697 - Fax +39 0331 602001 - www.ilclube.com - [email protected]

Open the catalog to page 4

Boring template for MPO without a tank I.L.C. srl - Via Garibaldi, 149 - 20155 Gorla Minore - Italy Phone +39 0331 601697 - Fax +39 0331 602001 - www.ilclube.com - [email protected]

Open the catalog to page 5

I.L.C. srl - Via Garibaldi, 149 - 20155 Gorla Minore - Italy Phone +39 0331 601697 - Fax +39 0331 602001 - www.ilclube.com - [email protected] MADE IN ITALY

Open the catalog to page 6

MPO

MPO

Catalog excerpts

All I.L.C. srl catalogs and technical brochures