MINI-MAX ELECTRIC GREASE PUMP

MINI-MAX ELECTRIC GREASE PUMP MODULAR The appearance of the products may be subject to change without notice Mini-Max electric pump was designed to work both as a multi-outlet system and with DPX progressive distributors. Naturally both systems can also be combined. It is driven by a 12 V DC or 24 V DC gearmotor and is capable of pumping grease with a max consistency of NLGI 2. On demand it can be supplied with a Timer. The pump can be equipped with a maximum of 10 pumping elements; two outlets can be connected to progressive distributors and eight outlets can be connected directly to the points...

I.L.C. srl - Via Garibaldi, 149 - 21055 Gorla Minore (Va) - Italy Ph. +39 0331 601697 Fax +39 0331 365149 - www.ilclube.com - [email protected] The appearance of the products may be subject to change without notice

GENERAL TECHNICAL FEATURES The appearance of the products may be subject to change without nolice 11 The MINI-MAX pump timer is housed inside the structure near the gearmotor and can be accessed by removing the transparent protective cap. The transparency makes it possible to view the two LED's indicating power on and alarm level from the outside. Once the protection has been removed, the times and functions can be set in the desired mode and the manual pushbutton activated. GENERAL TECHNICAL FEATURES OF INTERNAL TIMER Power supply voltage I.L.C. srl - Via Garibaldi, 149 - 21055 Gorla Minore...

ELECTRICAL LEVEL CODE OF PUMPING ELEMENTS FOR SINGLE POINT SINGLE PUMPING ELEMENTS METERING PUMPING ELEMENT ASSEMBLY PUMPING POSITION MODEL FOR METERING DEVICES FOR METERING DEVICES SINGLE POINT SINGLE POINT SINGLE POINT SINGLE POINT SINGLE POINT SINGLE POINT SINGLE POINT SINGLE POINT aojou ,f:ci jjM eSuap 0| pejqrs eq few spnpcjd 914 ;o soupffi :!d- 914 IMPORTANT If the model, quantity and position of the pumping elements are not specified, the control unit will have the standard supply of just one pumping element for the progressive distributors installed at position N°7. Additional pumping...

MAIN COMPONENTS ACCESSORIES 1 BLOCK WITH PRESSURE GAUGE AND GREASE NIPPLE The block is installed on the delivery line to check pressure of the system and/or to fill it through a grease nipple It can only be installed in pumping elements for progressive distributors PART N° 40.BMI.01 PART N° 40.BMI.01 W/SAFETY VALVE HAND PUMP AND ADAPTOR FOR FILLING TANK I.L.C. srl - Via Garibaldi, 149 - 21055 Gorla Minore (Va) - Italy Ph. +39 0331 601697 Fax +39 0331 365149 - www.ilclube.com - [email protected]

ELECTRIC CONNECTIONS The MINI-MAX pump is supplied complete with 7 pole electric connector A91.111327. The supply includes 3 types of rubbers for different diameters and for unused contacts: n. 7 part n° A91.111315 1.2 to 2.1 mm² cables n. 7 part n° A91.111314 2.2 to 3 mm² cables n. 7 part n° A91.111310 cap On demand, the connector can be ordered complete with 3-wire or 7-wire cable (1 mm²) in 3 different lengths 3-WIRE MODEL OPTIONAL ELECTRIC CONNECTIONS Both connections are positioned on the left-hand side of the pump as indicated in the figure to the side. CONNECTION TO INDUCTIVE CONTROL SENSOR...

I.L.C. srl - Via Garibaldi, 149 - 21055 Gorla Minore (Va) - Italy Ph. +39 0331 601697 Fax +39 0331 365149 - www.ilclube.com - [email protected] 179 The appearance of the products may be subject to change withou

I.L.C. SRL VIA GARIBALDI, 149 21055 GORLA MINORE (VA) - ITALY PH. +39 0331 601697 FAx +39 0331 365149 E-MAIL: [email protected] WWW.ILCLUBE.COM