Catalog excerpts
RETURN FILTERS ELEMENT COLLAPSE PRESSURE RATING (ISO 2941) MATERIALS BODY Conductive nylon Reinforced nylon Buna Zinc-plated steel INNER TUBE Zinc-plated steel FILTER MEDIA MICROFIBER ANTISTATIC MICROFIBER OPERATING TEMPERATURE BUNA BY-PASS VALVE ACTIVATION DIFFERENTIAL PRESSURE SETTING FLUIDS COMPATIBILITY - ISO 2943 (N. ISO 6743/4) MINERAL OILS (1) HFAE - HFAS HS - HFDR - HFDU - HFDS (1) With Buna seals (2) With Viton seals TECHNICAL FEATURES ●● Tank top filters to protect the circuit return line flows ●● 360° adjustable connection ●● "AF" microfiber and conductive plastics media to minimize the risk of electric discharges inside the element ●● Wide range of accessories and clogging indicators (3) Without zinc-plated elements
Open the catalog to page 1HF532 PRESSURE DROP CURVES HF532-10.062 BY-PASS VALVE PRESSURE DROP CURVE flow (l/min) ►►Curves determined under the following conditions: SAE10 mineral oil - 30 cSt kinematic viscosity - 0,856 kg/dm3 density
Open the catalog to page 2HF532 FLOWS CHART INLET FILTER TYPE Hose adaptor
Open the catalog to page 3TANK HOLE FILTER TYPE
Open the catalog to page 4HF532 HEK02 FILTER ELEMENT DIMENSIONS ELEMENT TYPE ACCESSORIES BOWL EXTENSION LEVEL DIPSTICK ►►Specify bowl extension and level dipstick length when ordering
Open the catalog to page 5OPERATING INSTRUCTIONS ASSEMBLY ELEMENT REPLACEMENT After checking the integrity of the filter inside its package, proceed as follows: ●● Take the protection cap off the inlet port. ●● Ensure the filter to the tank through the flange holes by using a torque of 5 Nm. ●● Connect the circuit return pipes to the inlet port with the appropriate hose clamp. ●● If the filter has a clogging indicator, take the protection cap off and screw the indicator into the dedicated seat to a torque of 30 Nm. ●● Start the circuit for a few minutes. ●● Make sure there are no leaks. Proceed as follows: ●● Stop...
Open the catalog to page 6HF532 BUILD YOUR FILTER Write here ↓↓↓ 1 FILTER TYPE Rear manometer Visual indicator Electrical indicator Bowl extension (choose length) Level dipstick (choose length) FILTER SURFACE Standard FILTRATION DEGREE BY-PASS VALVE INLET Ø 19,5 mm hose adaptor INDICATOR PORTS INDICATOR THREAD
Open the catalog to page 7BUILD YOUR FILTER ELEMENT Write here ↓↓↓ 1 ELEMENT TYPE FILTER SURFACE Standard FILTRATION DEGREE VERSION With valve and spring Without valve and spring BY-PASS VALVE ●: only combination available ►►For special requests please c
Open the catalog to page 8RETURN FILTERS HF 502/508 HF 532 HF 547 HF 554 HF 570/575/578 SPIN-ON FILTERS HF 620/625 HF 650 MEDIUM AND HIGH PRESSURE FILTERS HF 690 HF 705 HF 710 HF 725 HF 731 HF 735 HF 741 HF 745 HF 749 HF 760 HAND PUMPS EP ACCESSORIES HB 02/50/70/110/120 AF 105/106 HL 91 INDICATORI DI INTASAMENTO FLUX OIL IK 15/50 R 15/50 Via C. Prampolini, 2 43044 Lemignano di Collecchio Parma - Italy Phone: +39 0521 304911 info@ikron.it www.ikron.it
Open the catalog to page 12All Ikron catalogs and technical brochures
-
IKRON FLUX OIL
5 Pages
-
HL98
4 Pages
-
HF690
10 Pages
-
HF547
28 Pages
-
HF 502 / HF 508 series
44 Pages
-
HF431/434/437
4 Pages
-
HF 410 / HF 412 series
20 Pages