EJX series, high flow rate type FEATURES ■ Taking in surrounding liquid, the EJX solution agitation nozzle spouts out 3-4 times more volume than the amount supplied ■ Compared to the conventional EJX, this new model has higher flow rate (velocity) and straighter propagation ■ Simple design ■ Made of highly chemical-resistant polypropylene (PP) Cleaning in liquids Submerged etching, plating Solution agitation, Preventing deposition, uniformizing concentration *Particularly for applications which require high flow rate and straight stream propagation High flow rate type EJX series ■Comparison on spray impact in water 100 EJX-series High flow rate type: 3/4MEJX1*0/64PP(φ45-160) Conventional EJX-series: Conventional EJX having the same flow volume as EJX High flow rate type Distance from center (mm) Spray conditions： Spraying pressure: 0.1 MPa Supplied water volume: 64 L/min Measured distance: 300 mm Spray impact value: Whole spray impact measured by a spray impact sensor of φ3 mm Distance from center (mm) High flow rate EJX series, featuring 1.5-2 times higher spray impact (flow velocity) compared to the conventional EJX series, achieves a great effect on cleaning in liquids and p

Material: Polypropylene (Injection-molded) Material: Polypropylene Pipe conn. For inquiries or orders, please specify the model number as below. For details or inquiries please feel free to contact a sales office or mail us at [email protected]. Daiichi Kyogyo Bldg., 1-15-15, Awaza Nishi-ku, Osaka 550-0011, Japan E-mail: [email protected] Room C, 21/F, Electrical & Mechanical Bldg., 600 Hengfeng Road, Shanghai 200070, P.R.China 8110 Beckett Center Drive, Westchester, OH 45069 USA Asterweg 17 A6, 1031 HL Amsterdam, The Netherlands 11 F-1, No.27, Sec.1, Chung Shan N. Rd..Taipei,...